10.0.107.1 router login
To open the admin panel, type 10.0.107.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.107.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password are documented for this address. Gateway equipment in segmented networks is usually configured by an administrator, so the factory pair on the label has often been replaced already. Check the hardware label or the model's manual for the original defaults, and the network's own documentation or support contact for the account actually in use.
How to log in to your router
Type 10.0.107.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.107.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Resetting a device in this position is heavier than resetting a home router, because a factory reset drops the VLAN configuration, routing, firewall rules and address assignments that keep the segment reachable, and any wireless it serves reverts to the label's name and key. Everything downstream can lose connectivity, so seek the credentials from whoever manages the network first.
10.0.107.1 is part of 10.0.0.0/8, the RFC 1918 block that provides 16,777,216 addresses under a 255.0.0.0 netmask. Its size is the point: it is subnetted heavily for enterprises, campuses, provider-managed customer equipment, VPN pools and orchestration platforms, so a third octet as specific as 107 often reflects a numbering scheme where the segment corresponds to a VLAN, site or department.
The local subnet is 10.0.107.0/24, with usable hosts from 10.0.107.1 to 10.0.107.254 and broadcast at 10.0.107.255. The .1 position is the customary place for the router or layer-3 interface serving that segment, so this address most likely acts as the default gateway for hosts around it. Someone reaching this page is generally trying to open that gateway's management interface or confirm what the address does.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN