10.0.15.64 router login

To open the admin panel, type 10.0.15.64 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.15.64 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is recorded for this address, and guessing one would be worthless because the credentials belong to whatever device answers here, not to the number itself. Check the printed label on the unit, which on many devices carries the factory login, then the supplied manual, and finally the documentation from the ISP or IT department that issued the equipment.

How to log in to your router

  1. Type 10.0.15.64 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.15.64, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If nobody knows the current password, the device's own recovery path is the only reliable route: many units expose a recessed reset button held for roughly ten to thirty seconds while powered. That returns everything to factory state, so port forwards, DNS entries, firewall rules and any customised settings are lost, and the Wi-Fi network name and key revert to the values printed on the label.

10.0.15.64 belongs to 10.0.0.0/8, the private range defined by RFC 1918 and written with the netmask 255.0.0.0. That one block contains 16,777,216 addresses, which is why it is the range most often chosen by corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container platforms — all of which subnet it far below the /8 boundary before any host ever uses it.

Locally the address falls in 10.0.15.0/24, where usable hosts run from 10.0.15.1 to 10.0.15.254 and 10.0.15.255 is reserved for broadcast. Host number 64 is not one of the low positions a router conventionally occupies, so this is more commonly a client or server holding a lease or a static assignment. Most visitors have read the address off a DHCP table or a log line and want to know what answers on it. A further 107 addresses in the same /24 are documented separately.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.15.0/24
Usable10.0.15.1 – 10.0.15.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN