10.0.18.63 router login
To open the admin panel, type 10.0.18.63 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.18.63 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No username and password combination is recorded for 10.0.18.63, so none is published here. Any login prompt reached at this address belongs to a device with its own defaults, typically printed on a sticker on the underside or rear panel. The model's manual and the paperwork from whoever supplied or installed the equipment are the other reliable sources.
How to log in to your router
Type 10.0.18.63 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.18.63, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Recovering access without the password normally means asking the network administrator or, on personally owned equipment, performing a factory reset. That reset is not selective: it clears static routes, subnet settings and firewall rules together, and the wireless name and passphrase fall back to the printed label values. On a subnet with custom masking, expect to reconfigure the addressing afterwards.
10.0.18.63 lies within 10.0.0.0/8, the largest private range under RFC 1918, covering 16,777,216 addresses behind the netmask 255.0.0.0. Its scale explains its popularity in enterprise and campus networks, ISP-managed equipment, carrier platforms, VPN address pools and container orchestration, where it is always divided into much smaller subnets.
On the /24 boundary used here, 10.0.18.0/24, the address is an ordinary host: the usable range is 10.0.18.1 to 10.0.18.254 and only 10.0.18.255 is the broadcast address. This is worth noting, because a final octet of 63 would be the broadcast address if the same space were split into /26 subnets, and that difference occasionally confuses people troubleshooting a machine that seems unreachable. Checking the netmask actually configured on the host is therefore the first useful diagnostic step for this particular address.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.18.0/24
The 10.0.18.0/24 subnet runs from 10.0.18.1 to 10.0.18.254, with 10.0.18.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
66 addresses in this subnet have a page; the most looked-up are listed here.