10.0.23.1 router login

To open the admin panel, type 10.0.23.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.23.1 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is known to be associated with 10.0.23.1. Since private addresses are reused freely, the credentials depend entirely on the device that happens to answer here, not on the address. Look for a label printed on the underside or rear of the unit, which on many devices carries the management address, default login and the factory wireless key. Failing that, check the printed quick-start guide, the manufacturer's manual for that exact model number, or, on ISP-supplied equipment, the provider's own support documentation. Where an installer or administrator configured the device, the credentials were commonly changed at setup.

How to log in to your router

  1. Type 10.0.23.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.23.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the login is genuinely unknown, a factory reset is usually the only way back in, and it is not a small step. Resetting commonly clears the wireless network name and key, port forwarding and firewall rules, PPPoE or ISP account details, static routes, VLANs and any custom LAN addressing, which means the device may not return on 10.0.23.1 afterwards. Export or photograph the current configuration first if you can still read it, and confirm you have any ISP credentials needed to reconnect. No vendor is known to ship this address as a default gateway, so follow the reset procedure in the documentation for your specific model rather than a generic one.

10.0.23.1 is a private IPv4 address inside 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0, that block spans 16,777,216 addresses and is never routed across the public internet. It is the space most often chosen for corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where it is subnetted far below /8. Because private space is reusable by anyone, this address has no owner, registrant or geographic location: the device answering it is whichever machine has been configured with it on the network you are currently attached to.

In practice the address is normally seen as part of 10.0.23.0/24, a subnet whose usable host range runs from 10.0.23.1 to 10.0.23.254, with 10.0.23.255 reserved as the broadcast address. 10.0.23.1 is the first usable host, the position conventionally given to the router, firewall or layer 3 switch acting as default gateway, although nothing in the standards requires that. Thirty other addresses in the same /24 are documented separately.

Most people looking this address up are trying to open a management interface on it, in order to check a connection, change wireless settings, forward a port, or work out which device holds the gateway role on their segment.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.23.0/24
Usable10.0.23.1 – 10.0.23.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.23.0/24

The 10.0.23.0/24 subnet runs from 10.0.23.1 to 10.0.23.254, with 10.0.23.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

All addresses we cover here

31 addresses in this subnet have a page; the most looked-up are listed here.