10.0.62.1 router login
To open the admin panel, type 10.0.62.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.62.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default sign-in details are recorded for 10.0.62.1, and guessing at them would be misleading, since gateways at this position are supplied by many different manufacturers. The correct defaults belong to the physical unit in front of you: read the sticker on its case, the enclosed setup leaflet, or the model's manual. Equipment installed by an ISP often has site-specific credentials in the service paperwork.
How to log in to your router
Type 10.0.62.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.62.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Where the gateway password has been changed and forgotten, contacting the network's administrator or the ISP is usually faster than resetting, and on managed equipment the provider may be the only party able to restore access. A hardware reset discards the whole configuration, including port forwarding, DHCP scopes and any provider provisioning, and sets the Wi-Fi name and password back to the printed label values.
10.0.62.1 is drawn from 10.0.0.0/8, the private range defined by RFC 1918 that spans 16,777,216 addresses beneath the netmask 255.0.0.0. Because it is so large, it dominates in environments where many separate subnets are needed at once, such as business and university networks, ISP-managed home equipment, carrier infrastructure, VPN allocation pools and container platforms.
As part of 10.0.62.0/24, this address is the first usable one, ahead of a range that continues to 10.0.62.254 and ends with a broadcast address of 10.0.62.255. The .1 position is the conventional home of a gateway or router interface, so a device answering here is likely to be routing traffic for the rest of the subnet rather than acting as an ordinary client. That is why most people looking up 10.0.62.1 have found it listed as their default gateway and want to reach its administration page.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN