10.1.0.38 router login
To open the admin panel, type 10.1.0.38 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.1.0.38 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default credential pair is on record for 10.1.0.38, so we will not supply one. The device reachable at this address carries its own factory login, normally printed on a label on the underside or back, repeated on the quick-start card, and listed in the manufacturer's manual. Hardware installed by an internet provider often uses provider-set credentials documented in the customer account or welcome material.
How to log in to your router
Type 10.1.0.38 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.1.0.38, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the administrative password has been lost, a factory reset returns control at the cost of the configuration. Holding the reset button until the device restarts erases everything you set up, from routing and DHCP behaviour to firewall policy and any custom DNS entries, and puts the Wi-Fi network name and password back to the label defaults. Take a configuration backup first if you can still reach the interface at all.
10.1.0.38 falls within 10.0.0.0/8, the private block RFC 1918 reserved for internal networks, spanning 16,777,216 addresses with the netmask 255.0.0.0. Addresses here are never globally routed and are reused without coordination, so questions about their owner, provider or country have no valid answer. The block is standard in corporate and campus environments, ISP-managed customer equipment, VPN pools and container networks, always subdivided far below the /8 boundary.
One common way to carve that space is a second-octet-per-site scheme, and this address sits in 10.1.0.0/24, a subnet whose usable hosts run from 10.1.0.1 to 10.1.0.254 with broadcast at 10.1.0.255. Only 24 other addresses in that /24 appear in our records, suggesting a lightly documented segment. Host 38 is a low-to-middle position, typical of an early DHCP lease or an assigned workstation rather than the gateway. Most readers are trying to work out what device answers here.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.1.0.0/24
The 10.1.0.0/24 subnet runs from 10.1.0.1 to 10.1.0.254, with 10.1.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
25 addresses in this subnet have a page; the most looked-up are listed here.