10.10.30.1 router login

To open the admin panel, type 10.10.30.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.30.1 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password is known for 10.10.30.1. Addresses in structured 10.x deployments are assigned by whoever designed the network, not by a manufacturer, so there is no factory pair to publish.

If you administer the device, its own defaults will be on the chassis label or in the model's documentation, and on enterprise gear may instead require console access with a documented initial account. If you do not administer it, the credentials belong to your IT team, network operator or service provider. On a managed VLAN gateway they will have been changed during commissioning and are often tied to a central directory or RADIUS rather than a local account.

How to log in to your router

  1. Type 10.10.30.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.30.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

A factory reset on a gateway at 10.10.30.1 is disruptive out of proportion to the problem it usually solves. Everything routing that subnet goes with it: interface addressing, static routes, VLAN membership, access control lists, NAT rules, DHCP scopes and any VPN or tunnel configuration. Devices in a designed 10.x scheme are frequently one node in a larger topology, so the segment can stay dark until the configuration is restored from backup.

No vendor is recorded for this address, so consult the documentation for the actual hardware. Before resetting, try console or out-of-band access and a documented password-recovery mode, which on much managed equipment preserves the running configuration.

10.10.30.1 lies in 10.0.0.0/8, the broadest range RFC 1918 sets aside for private use. Its 255.0.0.0 netmask covers 16,777,216 addresses, an allocation so large that it is invariably subnetted far below /8 in practice. Networks that reach for it tend to be built rather than bought: corporate and campus deployments, ISP-managed customer equipment, carrier-grade platforms, VPN address pools and container networking. The tidy 10.10.30 pattern is itself a hint of deliberate design, the kind of scheme where the second and third octets encode a site, a floor or a VLAN.

The local segment is 10.10.30.0/24, offering hosts from 10.10.30.1 to 10.10.30.254 with 10.10.30.255 reserved for broadcast. As the first usable address it occupies the conventional gateway slot, so the responder is most often a router, layer three switch interface or firewall serving that VLAN.

Only four other addresses in this /24 are documented here, which fits a segment that is planned and sparsely populated rather than filled by a consumer DHCP pool. Around 173 searches a year arrive for this address, typically from someone who found it listed as their default gateway and wants to log in or troubleshoot connectivity through it.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.30.0/24
Usable10.10.30.1 – 10.10.30.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.10.30.0/24

The 10.10.30.0/24 subnet runs from 10.10.30.1 to 10.10.30.254, with 10.10.30.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

All addresses we cover here

5 addresses in this subnet have a page; the most looked-up are listed here.