10.10.4.1 router login
To open the admin panel, type 10.10.4.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.10.4.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 10.10.4.1, and none should be assumed. An address in private space carries no credentials of its own; whatever sign-in the page presents belongs to the particular device configured to use it, which differs from network to network.
Check the label or sticker on the equipment itself, where defaults are commonly printed alongside the serial number and default wireless key. Failing that, consult the manual or the manufacturer's support pages for that exact model, and on ISP-supplied equipment the provider's own documentation, since providers often set unique per-unit credentials that override the factory defaults.
How to log in to your router
Type 10.10.4.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.10.4.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the interface loads but the credentials are rejected, first rule out a password set during installation, whether by an administrator, a previous owner or an installing technician. On managed or business networks the credentials are frequently held centrally rather than left at their defaults, so asking whoever administers the network is usually faster than any recovery attempt.
A factory reset, commonly performed by holding a recessed button for roughly ten to thirty seconds while the device is powered on, is a last resort. It restores the default sign-in but also erases the configuration: wireless names and keys, any custom addressing, port forwarding, and provider-specific provisioning that may need a technician to restore. Export a configuration backup first if the device offers one.
10.10.4.1 belongs to 10.0.0.0/8, the largest of the three private address ranges set aside by RFC 1918. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, which is why it is rarely deployed as a single flat network. It is instead subnetted far below /8 and shows up in corporate and campus networks, ISP-managed customer premises equipment, carrier-grade equipment, VPN address pools, and container and orchestration networks. Because the space is private, it is not routed on the public internet and the same address can be in use simultaneously on countless unrelated networks.
Within that block, 10.10.4.1 is the first usable address of the 10.10.4.0/24 subnet, which runs from 10.10.4.1 to 10.10.4.254 with 10.10.4.255 reserved as the broadcast address. The first usable address is a conventional place to put a default gateway, so on many networks a router, firewall or layer-three switch interface answers here, though nothing in the standards requires it. Sixteen other addresses in this /24 are separately documented.
Roughly 369 people a year look up this address. Most are trying to open its web administration interface, confirm what device is acting as their gateway, or recover access after a password change.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.10.4.0/24
The 10.10.4.0/24 subnet runs from 10.10.4.1 to 10.10.4.254, with 10.10.4.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
17 addresses in this subnet have a page; the most looked-up are listed here.