10.10.60.1 router login
To open the admin panel, type 10.10.60.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.10.60.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default login pair is documented for this address, which is expected for gateway hardware chosen by an organisation rather than shipped with a fixed factory account. If the device is yours, the label or rating plate normally carries the initial administrator details; otherwise consult the manual, the provisioning record, or whoever administers the network in question.
How to log in to your router
Type 10.10.60.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.10.60.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Losing the gateway password affects everyone behind it, so exhaust password-recovery procedures and stored configuration backups before resetting. A factory reset clears the routing table, VLAN definitions, firewall policy, VPN tunnels and DHCP scopes, and reverts any wireless name and password to the values printed on the label, taking the segment offline until the configuration is rebuilt.
10.10.60.1 comes from the RFC 1918 block 10.0.0.0/8, which offers 16,777,216 addresses behind a 255.0.0.0 netmask and dominates larger networks: corporate and campus deployments, provider-managed customer equipment, VPN address pools and container networks, all working with subnets far narrower than the /8 itself.
Inside that block the address occupies 10.10.60.0/24, usable from 10.10.60.1 to 10.10.60.254 with 10.10.60.255 as the broadcast address. Ending in .1 places it in the slot conventionally reserved for the default gateway, so on a network using this subnet it is likely to be a router, firewall or VLAN interface. The 10.10.60 pattern reads like a numbered segment in a deliberate plan — a site, floor or VLAN identifier. Anyone here is usually trying to log into that gateway or confirm what it is.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.10.60.0/24
The 10.10.60.0/24 subnet runs from 10.10.60.1 to 10.10.60.254, with 10.10.60.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
4 addresses in this subnet have a page; the most looked-up are listed here.