10.10.7.1 router login
To open the admin panel, type 10.10.7.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.10.7.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password is recorded for 10.10.7.1. Because addresses in this block are common on networks that somebody deliberately designed, the device answering here has often had its factory login replaced during commissioning, so even a correct factory pair might not work.
Start with the equipment's own label and its model-specific manual for the shipped defaults. On a work, campus or provider-managed network, the practical answer is that the credentials belong to the administrators, and requesting access from them is faster than any recovery attempt.
How to log in to your router
Type 10.10.7.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.10.7.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Resetting a device that is acting as a gateway takes the whole subnet offline while it reboots and comes back with no configuration, meaning routing, DHCP, firewall policy and any uplink settings all disappear. On managed hardware that outage is the real cost, not the reset itself.
If you own the device, hold the recessed reset control for the interval its manual specifies while it is powered, then reconfigure from a saved backup. Take that configuration backup first if you can still log in at all.
10.10.7.1 falls inside 10.0.0.0/8, the broadest block RFC 1918 sets aside for private use. Under netmask 255.0.0.0 it contains 16,777,216 addresses, and in practice that space is carved into far smaller subnets for corporate and campus networks, provider-managed customer equipment, carrier hardware, VPN pools and container networking. The block itself is unallocated public space reused freely, so the address identifies no organisation, no country and no operator.
In its own subnet, 10.10.7.0/24, the usable range starts at 10.10.7.1 and ends at 10.10.7.254, with broadcast at 10.10.7.255. This address takes the first host position, and the first usable address of a subnet is the slot administrators most often reserve for the router or layer-three interface serving it. That makes a gateway role plausible here, though not certain, since the convention is a habit rather than a rule. Fifteen further addresses in this /24 are documented.
Around 195 people a year search for it, typically after finding it listed as the default gateway on a laptop, phone or server and wanting to reach the device that is routing their traffic.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.10.7.0/24
The 10.10.7.0/24 subnet runs from 10.10.7.1 to 10.10.7.254, with 10.10.7.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
16 addresses in this subnet have a page; the most looked-up are listed here.