10.108.1.40 router login
To open the admin panel, type 10.108.1.40 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.108.1.40 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
Nothing in our data records a factory username and password for 10.108.1.40. Private addressing carries no manufacturer information, so the defaults have to come from the device: check the sticker on its base or rear, the setup leaflet, or the manufacturer's documentation for that model number. On managed networks, the operator's own credentials will normally supersede any factory pair.
How to log in to your router
Type 10.108.1.40 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.108.1.40, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
With no usable password, restoring factory defaults is the remaining option, typically by holding a recessed button for ten seconds or more with the unit powered. Be clear about the trade: all customisation is discarded, from address settings and access rules to device names, and the wireless SSID and passphrase revert to the printed label values, forcing every connected client to be re-paired.
The 10.0.0.0/8 range, set aside for private networks by RFC 1918, contains 10.108.1.40. That range spans 16,777,216 addresses beneath a 255.0.0.0 netmask, and its sheer size means the second octet, 108 in this case, usually encodes some organisational division such as a site, region or tenant chosen entirely by whoever designed the network.
The address occupies the 10.108.1.0/24 subnet, whose hosts run 10.108.1.1 to 10.108.1.254 above a broadcast address of 10.108.1.255. Host 40 is a low-to-middle value, well away from the .1 position where routers commonly sit, so it more likely identifies an endpoint or a fixed piece of equipment than a gateway. Searches for it generally come from someone reading a log entry, a DHCP lease or a network scan. No other addresses in this particular /24 currently appear in our records.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN