10.11.0.1 router login

To open the admin panel, type 10.11.0.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.11.0.1 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 10.11.0.1, and because private addresses are reused freely by anyone, no credential set can be inferred from the address itself. The sign-in details belong to whichever device happens to answer on your network. Check the label printed on the device, commonly on the underside or rear, which often carries the factory administrator account. Failing that, consult the printed or downloadable manual for that exact model. On ISP-supplied equipment the defaults are frequently unique per unit and appear on the label or in the documentation the provider issued with the account.

How to log in to your router

  1. Type 10.11.0.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.11.0.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the interface loads but the password is rejected, try any credentials recorded when the device was installed, and on managed or ISP-supplied equipment ask the network administrator or the provider before going further. A factory reset is a last resort, because it is not simply a password reset: it clears Wi-Fi network names and keys, port forwarding, DHCP and static addressing, firewall rules and any provider connection settings, so the network can stay offline until it is reconfigured or reprovisioned. No specific vendor is known to ship this address as a default gateway, so follow the reset procedure in your own device's manual rather than a generic button-hold time.

10.11.0.1 is a private IPv4 address inside 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0 that block holds 16,777,216 addresses, and none of them are routable across the public internet. Any organisation may use the range internally, so the same address exists simultaneously on countless unrelated networks; it has no registrant, operator or geographic location to look up, and a whois query on it will not identify whose network you are actually on.

Within a network, 10.11.0.1 commonly falls in the 10.11.0.0/24 subnet, whose usable range runs from 10.11.0.1 to 10.11.0.254 with 10.11.0.255 reserved for broadcast. It is the first usable address in that subnet, the position most administrators assign to the router or default gateway. The 10/8 block is typical of corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, all of which subnet the space far below /8, with a /24 like this one being a common working size. Twenty other addresses in the same /24 are documented here.

Most people who look this address up, a few hundred a year, have found it listed as their default gateway and want to open the management interface of whatever device answers on it, usually by browsing to http://10.11.0.1 from a machine on the same subnet.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.11.0.0/24
Usable10.11.0.1 – 10.11.0.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.11.0.0/24

The 10.11.0.0/24 subnet runs from 10.11.0.1 to 10.11.0.254, with 10.11.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

All addresses we cover here

21 addresses in this subnet have a page; the most looked-up are listed here.