10.140.1.1 router login
To open the admin panel, type 10.140.1.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.140.1.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is recorded for 10.140.1.1. Gateway devices in networks numbered this way are typically configured by an administrator, so factory credentials may already have been replaced. For the factory values, check the label on the chassis, the supplied documentation, or the vendor's manual for that model; ISP-provided units list them in service paperwork.
How to log in to your router
Type 10.140.1.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.140.1.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Resetting a gateway is disruptive, so treat it as a last step. A factory reset removes routing, DHCP scopes, firewall policy, VPN definitions and any port forwarding, and can take the whole segment offline until the device is reconfigured. Wireless settings, if present, revert to the name and password on the label. Check for a configuration backup or an administrator who holds the credentials first.
10.140.1.1 sits within 10.0.0.0/8, the private range with 16,777,216 addresses and a 255.0.0.0 mask. Deployments almost never use it flat; instead the second octet frequently identifies a site, region or tenant, which produces addressing schemes of the 10.140.x.x form seen in larger corporate, campus and carrier networks.
Its subnet is 10.140.1.0/24, usable from 10.140.1.1 to 10.140.1.254 with 10.140.1.255 reserved for broadcast. The address occupies the first usable slot, the conventional home for the default gateway, so on most networks arranged this way it is a router, layer-three switch or firewall interface handling traffic leaving the segment. No other addresses in this /24 are documented here, which simply means little has been reported about the segment. Most visitors want a login page or confirmation of what the gateway is.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN