10.189.2.123 router login

To open the admin panel, type 10.189.2.123 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.189.2.123 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default credentials are on file for 10.189.2.123. Nor should you expect a universal pair to exist for an address in this part of 10/8, where devices are typically configured by an operator instead of being left at factory settings.

If the device is yours, its own defaults appear on the label attached to the unit or in the manufacturer's manual for that model. If you reached the address across a VPN or an employer's network, assume the credentials were set during provisioning and are held by the administrators. Where an ISP supplied the equipment, its support documentation is the authority.

How to log in to your router

  1. Type 10.189.2.123 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.189.2.123, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Confirm ownership before considering a reset. Equipment on a segment like this is frequently managed by someone else, and clearing it removes provisioned settings such as tunnel configuration, authentication profiles and addressing that only the operator can put back.

For a device you do control, a factory reset costs its entire local configuration and usually returns it to a default LAN address unrelated to 10.189.2.0/24, so plan how you will reach it afterwards. The typical mechanism is a recessed button held roughly ten to thirty seconds while powered. Take a configuration backup first if the interface still admits you.

10.189.2.123 is an address in 10.0.0.0/8, the biggest RFC 1918 allocation, covering 16,777,216 addresses with a 255.0.0.0 netmask. Its scale suits corporate and campus networks, ISP-managed customer equipment, carrier-grade infrastructure, VPN address pools and container orchestration, all of which subnet it far more tightly than the /8 implies. A second octet as high as 189 points to an addressing plan with many sites or segments rather than a router default.

The local segment is 10.189.2.0/24, usable between 10.189.2.1 and 10.189.2.254, with 10.189.2.255 as its broadcast address. Position 123 sits in the middle of the range, exactly where dynamically allocated leases tend to land, and it is not a gateway slot. Ten other addresses in this subnet are documented, a sparse figure that fits a network segment seen by relatively few people rather than a default shipped to millions of homes.

Addresses in this shape commonly turn up on VPN clients, wireless guest networks, branch office LANs and carrier-side CPE. Someone searching for it has usually pulled it from a log, a remote access session or a firewall rule and wants to establish what kind of network assigned it.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.189.2.0/24
Usable10.189.2.1 – 10.189.2.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.189.2.0/24

The 10.189.2.0/24 subnet runs from 10.189.2.1 to 10.189.2.254, with 10.189.2.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

All addresses we cover here

11 addresses in this subnet have a page; the most looked-up are listed here.