10.24.1.51 router login
To open the admin panel, type 10.24.1.51 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.24.1.51 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for this address, and guessing one would be worthless because the credentials belong to whatever device happens to hold the address, not to the address itself. Check the label on the equipment, the quick-start card in the box, or the vendor manual for the model number you actually have. Managed corporate gear usually uses directory or ISP-issued accounts instead.
How to log in to your router
Type 10.24.1.51 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.24.1.51, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If sign-in fails, first confirm the device is really at 10.24.1.51 rather than assuming it, then try the account your administrator or ISP issued. A hardware reset, normally a recessed button held for around ten to thirty seconds, is the last resort: it erases every customisation, discards VLAN and firewall rules, and returns the Wi-Fi name and password to the values printed on the label.
10.24.1.51 sits inside 10.0.0.0/8, the largest of the three private ranges reserved by RFC 1918, with a netmask of 255.0.0.0 and 16,777,216 addresses in total. Nobody owns or registers this address; it is unallocated private space that any organisation may reuse behind NAT, so an identical address can exist simultaneously in thousands of unrelated networks. In practice the block is carved far below /8 for corporate and campus LANs, ISP-managed CPE, carrier equipment, VPN pools and container networks.
The surrounding /24 is 10.24.1.0/24, usable from 10.24.1.1 to 10.24.1.254 with 10.24.1.255 as the broadcast address. At host position 51 the address falls well inside the range DHCP servers hand out, so most people arriving here saw it in a client list, a lease table or a log line and are trying to work out which machine on their own network it identifies.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.24.1.0/24
The 10.24.1.0/24 subnet runs from 10.24.1.1 to 10.24.1.254, with 10.24.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
13 addresses in this subnet have a page; the most looked-up are listed here.