10.50.2.1 router login
To open the admin panel, type 10.50.2.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.50.2.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default credentials are on record for this address. A gateway position tells you the role of the device, not who built it, so there is no safe guess to offer. The device's own defaults are normally printed on a sticker on its base or back, repeated in the quick-setup leaflet, and listed in the model manual. Business gear is often configured with unique credentials at installation.
How to log in to your router
Type 10.50.2.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.50.2.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the gateway password has been lost, check whether a colleague or the installing provider holds it, and whether console or SSH access exists as an alternative. A factory reset via the recessed button wipes routing rules, firewall policy, VLANs and port forwarding, drops the device back to its shipped defaults, and reverts any wireless network name and key to the printed label values.
10.50.2.1 belongs to 10.0.0.0/8, the private range defined by RFC 1918 that spans 16,777,216 addresses under a 255.0.0.0 netmask. That range is unallocated and reusable, so identical addresses exist simultaneously inside countless unrelated networks. It shows up most in corporate and campus environments, ISP-managed customer equipment, carrier gear, VPN address pools and container networks, all of which subdivide it heavily.
Within 10.50.2.0/24 the usable span is 10.50.2.1 to 10.50.2.254, with 10.50.2.255 reserved for broadcast. This address occupies host position 1, the first usable slot and the position most often assigned to the router or gateway for a subnet. Anyone reading this page is probably trying to open a management interface, usually by entering the address in a browser after finding it listed as the default gateway on a connected computer or phone.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.50.2.0/24
The 10.50.2.0/24 subnet runs from 10.50.2.1 to 10.50.2.254, with 10.50.2.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
2 addresses in this subnet have a page; the most looked-up are listed here.