10.6.0.1 router login
To open the admin panel, type 10.6.0.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.6.0.1 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There are no documented default username and password pairs for 10.6.0.1. That is expected: an IP address does not carry credentials, and because 10.0.0.0/8 is reusable private space, the device answering here differs from network to network. Any list claiming a fixed login for this address is guessing.
Check the label or sticker on the device itself, which commonly prints the default administrator account and either a shared or per-unit password, then the printed or online manual for the exact model. On ISP-supplied or company-managed equipment the defaults are frequently changed at provisioning, so the provider's documentation or your network administrator is the reliable source.
How to log in to your router
Type 10.6.0.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.6.0.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the interface at 10.6.0.1 rejects every login, first confirm the device is genuinely yours to administer, since addresses in this range are common on managed and corporate equipment where a reset is not yours to perform. No specific vendor is known to ship this address as a default gateway, so no single reset procedure applies; consult the documentation for the exact model in front of you.
A factory reset is not a free action. It commonly erases the wireless network name and key, any custom LAN addressing, port forwarding, firewall rules and provider connection settings, which may leave the network offline until it is reconfigured. Export or photograph the current configuration first where the device allows it.
10.6.0.1 is a private IPv4 address from 10.0.0.0/8, the largest of the three ranges reserved by RFC 1918. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, and because it is private space it is never routed on the public internet: the same address exists independently inside countless separate networks, and no location, provider or owner can be attributed to it. Any device answering on 10.6.0.1 does so only within the network you are currently attached to.
The /8 is rarely used as one flat network. It is normally subnetted far below its native size, which is why 10.6.0.1 is best understood as the first host address of 10.6.0.0/24, a 254-address segment running from 10.6.0.1 to 10.6.0.254 with a broadcast address of 10.6.0.255. The first usable address in a /24 is a conventional place to put the gateway, so 10.6.0.1 is often the router or firewall interface for that segment rather than an ordinary client.
This part of the 10 space is typical of corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container or orchestration networks. Most people looking up this address are trying to reach a device's administration interface, confirm which equipment is acting as their gateway, or work out why a route or VPN tunnel is pointing here.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.6.0.0/24
The 10.6.0.0/24 subnet runs from 10.6.0.1 to 10.6.0.254, with 10.6.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
4 addresses in this subnet have a page; the most looked-up are listed here.