10.9.1.1 router login

To open the admin panel, type 10.9.1.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.9.1.1 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password are recorded for 10.9.1.1, and none should be inferred. Because 10.0.0.0/8 addressing is assigned by whoever built the network, the sign-in details on a device at this address are as likely to have been set by an administrator as shipped from a factory.

Check the printed label on the underside or rear of the unit, the quick-start card in the box, or the manufacturer's manual for the exact model. If the equipment was supplied by an internet provider or an employer, their own documentation or IT desk is the authoritative source.

How to log in to your router

  1. Type 10.9.1.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.9.1.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the interface at 10.9.1.1 rejects every login, a factory reset is the last resort rather than the first move. On a managed segment it wipes VLAN assignments, static routes, firewall rules, DHCP reservations and any VPN configuration, and the device typically returns to a manufacturer default address that may not be 10.9.1.1 at all, leaving you unable to reach it until you renumber your own machine.

Most devices reset through a recessed pinhole or button held while powered on. Confirm the exact hold time in the documentation for your specific model, and export a configuration backup first if the current login still works anywhere.

10.9.1.1 belongs to 10.0.0.0/8, the largest of the three private ranges reserved by RFC 1918. With a 255.0.0.0 netmask the block spans 16,777,216 addresses, so it is never deployed as one flat network; it is the largest RFC 1918 block, common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where the space is subnetted far below /8. An address written as 10.9.x.x usually reflects a deliberate numbering scheme rather than a factory default.

Within that scheme the relevant segment is 10.9.1.0/24. Hosts occupy 10.9.1.1 through 10.9.1.254, and 10.9.1.255 is the broadcast address. 10.9.1.1 is the first usable address in the segment, and administrators very often place the router or firewall interface there, so seeing it as your default gateway is unsurprising.

Most people arriving here have read 10.9.1.1 out of an ipconfig or route listing, or from a Wi-Fi status screen, and want to know what device answers on it. Only a handful of other addresses in this particular /24 have any documented usage at all, which fits a segment that is administered rather than mass-produced.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.9.1.0/24
Usable10.9.1.1 – 10.9.1.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.9.1.0/24

The 10.9.1.0/24 subnet runs from 10.9.1.1 to 10.9.1.254, with 10.9.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

All addresses we cover here

5 addresses in this subnet have a page; the most looked-up are listed here.