192.168.101.6 router login
To open the admin panel, type 192.168.101.6 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.101.6 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no documented default login for this address, and inventing one would only waste your time. Whatever answers at 192.168.101.6 ships with credentials specific to its make and firmware. Read them off the device label, the setup leaflet, or the model's manual. Managed or business-grade hardware sometimes has no factory password at all and forces you to set one on first access.
How to log in to your router
Type 192.168.101.6 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.101.6, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
When the password is genuinely lost, a hardware reset is usually the only route back in. Understand what it wipes: static IP assignments, VLAN or SSID configuration, access rules and firmware preferences all revert. If the unit broadcasts Wi-Fi, the network name and password return to the printed defaults, and clients that had the old key will fail to reconnect until re-paired.
192.168.101.6 falls inside 192.168.0.0/16, the 65,536-address private block defined by RFC 1918 and masked at 255.255.0.0. Traffic addressed here never leaves the local network, because routers on the public internet drop private destinations. That also means the address is anonymous by design: countless separate networks use it at the same time, and it can be reassigned by anyone.
Its subnet is 192.168.101.0/24, with hosts available from 192.168.101.1 to 192.168.101.254 and 192.168.101.255 acting as the broadcast address. Third octets in the low hundreds are often picked deliberately by whoever set the network up, to keep it clear of the default 192.168.0.x and 192.168.1.x ranges and avoid VPN collisions. Position 6 is low but not the conventional gateway slot, so it commonly belongs to a static-assigned server, printer or access point.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.101.0/24
The 192.168.101.0/24 subnet runs from 192.168.101.1 to 192.168.101.254, with 192.168.101.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
88 addresses in this subnet have a page; the most looked-up are listed here.