192.168.16.102 router login
To open the admin panel, type 192.168.16.102 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.16.102 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No credential pair is on record for 192.168.16.102. Rather than trying common combinations, work out which device answers there and consult its own documentation: the underside label, the printed setup guide, or the manufacturer's downloadable manual. Where the segment was configured by an administrator or an ISP technician, the login may have been changed from the factory value entirely.
How to log in to your router
Type 192.168.16.102 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.16.102, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Recovering an unknown password almost always means a factory reset, held on the reset button until the status lights cycle. Weigh what disappears: a device on a purpose-built segment like this may carry VLAN assignments, static addressing or access rules that all vanish, and the Wi-Fi name and password fall back to the label defaults, so plan to reconfigure from scratch.
192.168.16.102 belongs to 192.168.0.0/16, private space under netmask 255.255.0.0 containing 65,536 addresses. This is the consumer block: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Because RFC 1918 space is unallocated and reusable, no registrant, network operator or country can be attached to it.
Unlike the busier low subnets, this address lives in 192.168.16.0/24, spanning usable hosts 192.168.16.1 to 192.168.16.254 with 192.168.16.255 as broadcast. A third octet of 16 usually signals a router configured away from its factory LAN, or a segment carved out for guests, cameras or IoT gear. Host 102 is a routine DHCP allocation rather than a gateway slot. Most people looking it up are trying to identify what is holding the lease.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.16.0/24
The 192.168.16.0/24 subnet runs from 192.168.16.1 to 192.168.16.254, with 192.168.16.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
48 addresses in this subnet have a page; the most looked-up are listed here.