192.168.18.38 router login
To open the admin panel, type 192.168.18.38 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.18.38 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default login is recorded for 192.168.18.38 and none will be guessed. Devices carry their own factory credentials, printed on the equipment label or listed in its documentation. On a managed or segmented network, though, the more useful step is often to ask whoever administers it, since defaults are routinely replaced during deployment.
How to log in to your router
Type 192.168.18.38 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.18.38, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Resetting to factory settings restores the built-in credentials but destroys the configuration that made the device useful, which on a segmented network can mean losing VLAN membership, static addressing and access rules that are not trivial to recreate. Wireless name and password also revert to the label values. On a managed network, contact the administrator before resetting anything.
Any address of the form 192.168.x.x, 192.168.18.38 among them, belongs to 192.168.0.0/16, the private block described in RFC 1918. Masked at 255.255.0.0 it holds 65,536 addresses, all reserved for internal use and none allocated to a company or country. Two networks using the same private address never interfere, because neither address ever leaves its own LAN.
Here the relevant subnet is 192.168.18.0/24, whose usable hosts run from 192.168.18.1 to 192.168.18.254 with 192.168.18.255 as broadcast. Host 38 is an ordinary client slot rather than a gateway position. A third octet of 18 tends to indicate a network segmented on purpose, so people searching for this address are frequently working through an unfamiliar office or shared network rather than a home setup.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.18.0/24
The 192.168.18.0/24 subnet runs from 192.168.18.1 to 192.168.18.254, with 192.168.18.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
171 addresses in this subnet have a page; the most looked-up are listed here.