192.168.20.10 router login
To open the admin panel, type 192.168.20.10 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.20.10 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
This address has no documented default login, and inventing one would be worse than saying so. Static-assigned equipment still keeps its factory credentials until changed: check the label on the case, the setup leaflet, or the product manual for the exact model. If the address was configured by an administrator, the password has very likely already been changed from the default.
How to log in to your router
Type 192.168.20.10 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.20.10, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Hand-assigned devices are the ones where a factory reset hurts most. Resetting clears the static address itself, so the unit may reappear on a DHCP lease elsewhere in the subnet, along with losing shares, certificates, rules and any tuned configuration. Wireless-capable hardware also drops back to the network name and key on its label. Exhaust password recovery and documented backups first.
192.168.20.10 is drawn from 192.168.0.0/16, the RFC 1918 range that uses 255.255.0.0 as its block mask and holds 65,536 addresses. This is the consumer block, the one nearly all home routers, mobile hotspots and small office access points use for their default gateway, which is why it dominates what people see on their own networks. Read as a /24, the address belongs to 192.168.20.0/24, spanning 192.168.20.1 to 192.168.20.254 with 192.168.20.255 as broadcast.
Host 10 is a low, tidy number, exactly the kind of value administrators pick by hand for something that must stay put, such as a server, network storage box, hypervisor or managed switch. It is not the usual gateway position, so people reaching this page are commonly trying to open a management interface or confirm which fixed device owns the address.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.20.0/24
The 192.168.20.0/24 subnet runs from 192.168.20.1 to 192.168.20.254, with 192.168.20.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
105 addresses in this subnet have a page; the most looked-up are listed here.