192.168.8.39 router login

To open the admin panel, type 192.168.8.39 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.8.39 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default login is documented for 192.168.8.39, and inventing one would not help: a client address does not imply a management interface, and many devices at this position have no web login at all.

If the address does serve a configuration page, the credentials belong to that specific product. Look for them on the device label, in the quick-start guide, or in the manufacturer's downloadable manual. Portable and battery-powered equipment often prints its initial login alongside the wireless key on a card in the packaging, or shows it on a small built-in display.

How to log in to your router

  1. Type 192.168.8.39 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.8.39, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Confirm the address is still live before assuming a lockout. DHCP leases expire, and a device that held .39 yesterday may have moved, which makes a failed connection look like an authentication problem when it is really an addressing one.

When a reset genuinely is needed, expect it to be total. Wireless credentials, data or roaming settings, connected-device lists, firewall rules and any customised address plan all revert, and on portable equipment a reset can also clear SIM or APN configuration that has to be re-entered by hand before the device is usable again.

192.168.8.39 sits within 192.168.0.0/16, the private block reserved by RFC 1918 for general use behind NAT. It offers 65,536 addresses with a 255.255.0.0 netmask, and it is the range consumer networking equipment overwhelmingly defaults into.

The address belongs to 192.168.8.0/24, a subnet worth noticing because it is one of the ranges portable and cellular networking gear commonly uses instead of the more crowded 192.168.0.x and 192.168.1.x. Usable addresses run 192.168.8.1 to 192.168.8.254, with broadcast at 192.168.8.255. Host 39 is a mid-range client number, the sort of value a small DHCP pool reaches after a handful of devices have connected and disconnected.

Eighty-five per cent of the subnet's other addresses are separately documented, so this is a segment people query often. That fits a network where the gateway is at a low number and everything else — phones, tablets, laptops tethered through a mobile connection — cycles through the middle of the range. If you are looking this address up, you most likely want to know whether it is your router or one of your own devices. At host 39, it is almost certainly the latter.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.8.0/24
Usable192.168.8.1 – 192.168.8.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN