10.0.10.1 router login

http://10.0.10.1 ↗

To open the admin panel, type 10.0.10.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.10.1 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 10.0.10.1, and because private addresses are reused freely there is no single set of credentials that could apply to every device answering on it. Guessing at common pairs rarely helps and can trigger a lockout after repeated failures. The device's own defaults are usually printed on a label on its underside or rear panel, alongside the serial number and default Wi-Fi key. Otherwise check the manual for that exact model, or your provider's support documentation if the equipment was supplied by them. Any credentials changed during setup override whatever is printed.

How to log in to your router

  1. Type 10.0.10.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.10.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the login page loads but no credentials work, a factory reset is a last resort rather than a first step. No specific vendor is known to ship this address as a default gateway, so follow the procedure documented for your own hardware; commonly this means holding a recessed reset button for roughly ten to thirty seconds while the device is powered on, though timing and button placement vary. A reset clears the whole configuration, including the Wi-Fi name and password, port forwarding, static leases, firewall and VPN settings, and any provider-specific provisioning. Export a configuration backup first if the interface still allows it, and expect provider-supplied equipment may need reprovisioning.

10.0.10.1 belongs to 10.0.0.0/8, the largest of the three ranges that RFC 1918 sets aside for private use. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, and it is the range most often chosen by corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container or orchestration networks. In practice the space is subnetted far below a flat /8, which is how a specific address like this one comes to sit inside a small local segment. Because the block is private it is not routable across the public internet, the same address is in use on countless unrelated networks at once, and it carries no owner, location or provider of its own.

The surrounding segment here is 10.0.10.0/24. Usable hosts run from 10.0.10.1 to 10.0.10.254, with 10.0.10.255 reserved as the broadcast address. 10.0.10.1 is the first usable address in that range, the position administrators most commonly assign to the default gateway, so on many networks it answers as a router or firewall interface rather than as an ordinary host.

Most people looking this address up want to reach that management interface, typically by opening http://10.0.10.1 from a device already connected to the same network.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.10.0/24
Usable10.0.10.1 – 10.0.10.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.10.0/24

The 10.0.10.0/24 subnet runs from 10.0.10.1 to 10.0.10.254, with 10.0.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.0.10.2 10.0.10.3 10.0.10.247 10.0.10.32 10.0.10.250 10.0.10.167 10.0.10.55 10.0.10.174

All addresses we cover here
10.0.10.2 10.0.10.3 10.0.10.4 10.0.10.5 10.0.10.7 10.0.10.12 10.0.10.13 10.0.10.20 10.0.10.26 10.0.10.32 10.0.10.33 10.0.10.39 10.0.10.45 10.0.10.46 10.0.10.50 10.0.10.53 10.0.10.54 10.0.10.55 10.0.10.61 10.0.10.62 10.0.10.72 10.0.10.76 10.0.10.78 10.0.10.79 10.0.10.80 10.0.10.81 10.0.10.84 10.0.10.88 10.0.10.91 10.0.10.92 10.0.10.107 10.0.10.112 10.0.10.115 10.0.10.119 10.0.10.127 10.0.10.130 10.0.10.135 10.0.10.138 10.0.10.139 10.0.10.141 10.0.10.148 10.0.10.149 10.0.10.156 10.0.10.160 10.0.10.163 10.0.10.167 10.0.10.172 10.0.10.174 10.0.10.196 10.0.10.209 10.0.10.213 10.0.10.216 10.0.10.222 10.0.10.225 10.0.10.232 10.0.10.246 10.0.10.247 10.0.10.250 10.0.10.251 10.0.10.254

67 addresses in this subnet have a page; the most looked-up are listed here.