10.0.10.2 router login

http://10.0.10.2 ↗

To open the admin panel, type 10.0.10.2 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.10.2 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 10.0.10.2, and none should be assumed. Private addresses carry no identity of their own, so credentials depend entirely on whichever device happens to be answering here. Look for the defaults printed on the label or sticker on the device itself, in the manual or quick-start guide, or in documentation from the ISP where the equipment was supplied by them. If the device is managed by an employer or a service provider, the defaults may have been changed at provisioning, and the administrator or provider is the correct place to ask.

How to log in to your router

  1. Type 10.0.10.2 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.10.2, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the interface loads but the credentials are rejected, first confirm which device is actually at this address, since a host in the second position of a subnet is often not the gateway. Check any password manager or notes from initial setup before going further. A factory reset is the last resort: it restores the defaults printed on the device but also erases the running configuration, commonly including wireless network names and keys, static addressing, port forwarding and firewall rules, and any provider-specific settings. On managed or provider-supplied equipment, a reset can drop the connection entirely until it is reprovisioned. Since no vendor is known to ship this address, follow the reset procedure in that device's own documentation.

10.0.10.2 is a private IPv4 address from 10.0.0.0/8, the largest of the three blocks set aside by RFC 1918. With a netmask of 255.0.0.0, the block spans 16,777,216 addresses, and none of them are routable across the public internet. Because the space is private, the same address is in use simultaneously on countless unrelated networks, and no location, ISP, owner or registrant can be attributed to it. The block is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where the space is subnetted far below /8.

In practice the address usually sits inside a much smaller subnet, most often 10.0.10.0/24. That subnet offers 10.0.10.1 through 10.0.10.254 as usable host addresses, with 10.0.10.255 reserved as the broadcast address. 10.0.10.2 is the second usable address in the range. That is not a typical router position: administrators commonly place the gateway on the first address, so a host at .2 is more often a server, an access point, a DHCP-assigned client or a secondary appliance.

Most people looking up this address are trying to reach a device management interface on their own network, confirm what a device found at this address actually is, or work out why the address does not respond from where they are.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.10.0/24
Usable10.0.10.1 – 10.0.10.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.0.10.0/24

The 10.0.10.0/24 subnet runs from 10.0.10.1 to 10.0.10.254, with 10.0.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.0.10.1 10.0.10.3 10.0.10.247 10.0.10.32 10.0.10.250 10.0.10.167 10.0.10.55 10.0.10.174

All addresses we cover here
10.0.10.1 10.0.10.3 10.0.10.4 10.0.10.5 10.0.10.7 10.0.10.12 10.0.10.13 10.0.10.20 10.0.10.26 10.0.10.32 10.0.10.33 10.0.10.39 10.0.10.45 10.0.10.46 10.0.10.50 10.0.10.53 10.0.10.54 10.0.10.55 10.0.10.61 10.0.10.62 10.0.10.72 10.0.10.76 10.0.10.78 10.0.10.79 10.0.10.80 10.0.10.81 10.0.10.84 10.0.10.88 10.0.10.91 10.0.10.92 10.0.10.107 10.0.10.112 10.0.10.115 10.0.10.119 10.0.10.127 10.0.10.130 10.0.10.135 10.0.10.138 10.0.10.139 10.0.10.141 10.0.10.148 10.0.10.149 10.0.10.156 10.0.10.160 10.0.10.163 10.0.10.167 10.0.10.172 10.0.10.174 10.0.10.196 10.0.10.209 10.0.10.213 10.0.10.216 10.0.10.222 10.0.10.225 10.0.10.232 10.0.10.246 10.0.10.247 10.0.10.250 10.0.10.251 10.0.10.254

67 addresses in this subnet have a page; the most looked-up are listed here.