10.0.12.104 router login

To open the admin panel, type 10.0.12.104 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.12.104 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No login details are recorded for 10.0.12.104, so none appear here. Determine which device holds the address, then take its defaults from the sticker on the chassis, the quick-start card, or the manual matching the exact model. In a corporate or provider-managed setting, defaults are commonly overwritten during provisioning, and the administrator holds the working credentials.

How to log in to your router

  1. Type 10.0.12.104 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.12.104, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Should the password be irretrievable, a factory reset is the standard recovery route, usually a pinhole button pressed and held while the device is running. It clears the configuration completely, including static addresses, forwarding rules, VLANs and any added accounts, and returns wireless settings to the SSID and key on the label. Capture the current setup first if the interface still responds.

10.0.12.104 sits within 10.0.0.0/8, the broadest private range in RFC 1918, masked 255.0.0.0 and totalling 16,777,216 addresses. Its size is the point: enterprise networks, university campuses, ISP-managed customer equipment, carrier-grade systems, VPN pools and container platforms all draw from it and then subnet it heavily. No geography, provider or organisation can be inferred from an address in this block.

The surrounding subnet is 10.0.12.0/24, usable from 10.0.12.1 to 10.0.12.254 with 10.0.12.255 acting as broadcast. Position 104 is a mid-range host number, the kind a DHCP server assigns without ceremony, and nothing about it suggests a gateway or other infrastructure role. Sixty-eight further addresses in this /24 are documented. Anyone here is generally chasing an unfamiliar entry in a router interface, an inventory list or a set of logs.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.12.0/24
Usable10.0.12.1 – 10.0.12.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN