10.0.12.183 router login
To open the admin panel, type 10.0.12.183 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.12.183 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 10.0.12.183, and guessing one is unhelpful. Defaults belong to the device, not the address, so check the label or sticker on the equipment itself, the printed or PDF manual for the exact model, or the documentation supplied by the ISP or IT department that provisioned it. On managed networks the defaults are often replaced during provisioning.
How to log in to your router
Type 10.0.12.183 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.12.183, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the password is unknown, ask whoever administers the network before resetting anything, since a device at this position may be a managed host rather than a router. A factory reset, usually a recessed button held for several seconds, clears the entire configuration: port forwarding, DHCP reservations, static routes and firewall rules are lost, and the Wi-Fi name and password revert to the values printed on the label.
10.0.12.183 sits inside 10.0.0.0/8, the largest of the three RFC 1918 private ranges, with netmask 255.0.0.0 and 16,777,216 addresses. That size is why the block turns up in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, all of which subnet it far below /8. The address is private, so it is not routable on the public internet and the same value is in use on countless unrelated networks at the same time.
In practice this address is reached as part of 10.0.12.0/24, a 254-host segment running from 10.0.12.1 to 10.0.12.254 with 10.0.12.255 as the broadcast address. Host position 183 is high in the range and not a position routers usually occupy; gateways are far more often at .1 or .254. Most people looking this up are trying to reach a device answering at this address on a network they are already connected to, or to identify what a client, server or appliance holding this lease actually is.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.12.0/24
The 10.0.12.0/24 subnet runs from 10.0.12.1 to 10.0.12.254, with 10.0.12.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
69 addresses in this subnet have a page; the most looked-up are listed here.