10.0.5.10 router login
To open the admin panel, type 10.0.5.10 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.5.10 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There are no documented default username and password pairs for 10.0.5.10, and that is expected rather than a gap: credentials belong to whatever device happens to hold the address, and a private address carries no product identity of its own. Anything presented as a universal login for this address would be guesswork.
Check the label or sticker on the equipment itself, which commonly prints the default administrative account, the management URL and sometimes a unique per-unit password. Failing that, consult the printed or downloadable manual for the exact model, or your ISP's documentation if the unit was supplied with a service.
How to log in to your router
Type 10.0.5.10 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.5.10, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
A factory reset is worth treating as a last resort. It clears the running configuration, which commonly includes the Wi-Fi network name and passphrase, port forwards, static leases and reservations, firewall and VLAN settings, and any PPPoE or authentication details needed to reach the internet. Devices that reconnect automatically today may need reconfiguring afterwards, and ISP-supplied equipment sometimes has to be re-provisioned.
No specific vendor is known to ship 10.0.5.10 as a default gateway, so no model-specific procedure can be given. On many devices the method is a recessed button held for roughly ten to thirty seconds while powered on. Export a configuration backup first if the interface still allows it.
10.0.5.10 is a private IPv4 address inside 10.0.0.0/8, the largest of the three blocks that RFC 1918 sets aside for private use. With a netmask of 255.0.0.0 the block spans 16,777,216 addresses, and it is the range most often chosen for corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container or orchestration networks. Traffic to it is never routed across the public internet, and because any network may reuse the block freely, the same address exists at the same moment on countless unrelated networks. That also means no location, ISP, owner or registrant can be attributed to it.
A /8 is almost always subnetted far below its native size, and this address is normally handled as part of 10.0.5.0/24, whose usable hosts run from 10.0.5.1 to 10.0.5.254 with 10.0.5.255 as the broadcast address. 10.0.5.10 is the tenth host position, which is not the position a gateway conventionally takes; router interfaces are usually placed at .1 or .254. A tenth-position address more commonly belongs to a statically assigned host or a DHCP reservation, such as a server, printer, access point or camera.
Most people arriving with this address read it out of an ipconfig or ifconfig listing, a DHCP lease table, a connected-clients list or a configuration file, and want to know what answers there. The practical first step is to open http://10.0.5.10 and https://10.0.5.10 from a device on the same subnet and see what the response actually is.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.5.0/24
The 10.0.5.0/24 subnet runs from 10.0.5.1 to 10.0.5.254, with 10.0.5.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
122 addresses in this subnet have a page; the most looked-up are listed here.