10.0.5.180 router login
To open the admin panel, type 10.0.5.180 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.5.180 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for 10.0.5.180. That is expected: an address in private space is not tied to any particular product, so credentials belong to whatever device happens to hold the lease, not to the number itself. Any list claiming otherwise is guessing.
Check the label on the device's underside or rear panel, where defaults are commonly printed alongside the serial number and a default management address. Failing that, the model's own manual or, on ISP-supplied equipment, the provider's account portal or support documentation is the reliable source. If the device is managed by an employer or a hosting platform, the credentials are held by whoever administers it.
How to log in to your router
Type 10.0.5.180 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.5.180, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the interface will not accept any password, first confirm you are on the same network segment: 10.0.5.180 is unreachable from outside the network it belongs to, and a VPN or guest SSID often places you on a different subnet entirely.
A factory reset is the last resort rather than the first, because it is genuinely destructive. It clears configuration such as Wi-Fi names and keys, port forwarding, static leases, firewall rules and any ISP provisioning, and on managed or provider-supplied hardware it can leave the device offline until it is re-provisioned. Since no vendor is known to ship this address, follow the reset procedure in that specific device's documentation, and export or photograph the current settings beforehand.
10.0.5.180 is a private IPv4 address drawn from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a netmask of 255.0.0.0, that block holds 16,777,216 addresses, and none of them are routable on the public internet. Any organisation may use the same address at the same time behind its own NAT boundary, so the address identifies a host only within the network you are currently attached to. It carries no location, no operator and no registrant, and looking it up in a public registry will tell you nothing about the machine answering on it.
In practice 10.0.0.0/8 is subnetted far below /8 and shows up in corporate and campus LANs, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks. Read as part of 10.0.5.0/24, this address is host 180 of the usable range 10.0.5.1 - 10.0.5.254, with 10.0.5.255 reserved as the broadcast address. Position 180 sits well into the upper half of that range, which is where DHCP pools commonly begin rather than where a gateway is typically pinned.
Most people arriving here have seen 10.0.5.180 in a DHCP lease table, an ARP or connection log, or a device's own status screen, and want to know what is on it or how to open its management interface.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.5.0/24
The 10.0.5.0/24 subnet runs from 10.0.5.1 to 10.0.5.254, with 10.0.5.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
122 addresses in this subnet have a page; the most looked-up are listed here.