10.10.0.1 router login

http://10.10.0.1 ↗

To open the admin panel, type 10.10.0.1 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.0.1 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is on record for 10.10.0.1, and no specific vendor is known to ship this address as a factory default gateway, so there is nothing reliable to publish here. Guessing is also counterproductive, as many admin interfaces lock out after a handful of failed attempts. A device's own defaults are commonly printed on a label on its underside or rear panel, next to the serial number and Wi-Fi key, and repeated in the quick-start guide or manual. On ISP-supplied equipment they are often unique per unit and listed in the account or installation paperwork.

How to log in to your router

  1. Type 10.10.0.1 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.0.1, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Work through the softer options first: the label and manual, the ISP account portal or support line for managed equipment, and any password the network administrator set. A factory reset is a last resort because it is not free. It clears the Wi-Fi network name and key, port forwarding, DHCP reservations, firewall and VLAN settings, and any PPPoE or similar connection credentials, so the device may need reprovisioning before it reaches the internet again. With no vendor known for this address, the general method applies: leave the unit powered on, hold the recessed reset button with a paperclip for the interval stated in its manual, often around ten to thirty seconds, and wait for it to reboot.

10.10.0.1 is a private IPv4 address from 10.0.0.0/8, the largest of the three RFC 1918 ranges. With a block netmask of 255.0.0.0 it spans 16,777,216 addresses, none of them routable on the public internet. That size is why the block turns up in corporate and campus networks, ISP-managed customer equipment, carrier-grade gear, VPN address pools and container or orchestration networks, where the space is subnetted far below /8. Because it is unallocated private space, the same address is in use on a great many unrelated networks at once, and it has no registrant, operator or location of its own.

Within that block this address sits in the 10.10.0.0/24 subnet, whose usable host range runs from 10.10.0.1 to 10.10.0.254, with 10.10.0.255 reserved as the broadcast address. It is the first usable host in the subnet, the position most often given to the router or firewall interface acting as the default gateway. A further 79 addresses in the same /24 are documented here.

Most people looking this address up are trying to reach a device administration page at http://10.10.0.1, usually after seeing it listed as the default gateway on a connected computer or phone. Confirming that with ipconfig, ip route or the network details on a mobile device is worth doing before anything else, since a /8 address alone says nothing about which device answers on it.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.0.0/24
Usable10.10.0.1 – 10.10.0.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.10.0.0/24

The 10.10.0.0/24 subnet runs from 10.10.0.1 to 10.10.0.254, with 10.10.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.10.0.3 10.10.0.4 10.10.0.7 10.10.0.2 10.10.0.105 10.10.0.8 10.10.0.254 10.10.0.10

All addresses we cover here
10.10.0.0 10.10.0.2 10.10.0.3 10.10.0.4 10.10.0.5 10.10.0.6 10.10.0.7 10.10.0.8 10.10.0.9 10.10.0.10 10.10.0.13 10.10.0.15 10.10.0.16 10.10.0.17 10.10.0.20 10.10.0.24 10.10.0.26 10.10.0.33 10.10.0.37 10.10.0.43 10.10.0.46 10.10.0.51 10.10.0.53 10.10.0.62 10.10.0.69 10.10.0.77 10.10.0.81 10.10.0.82 10.10.0.85 10.10.0.92 10.10.0.100 10.10.0.102 10.10.0.105 10.10.0.111 10.10.0.112 10.10.0.118 10.10.0.125 10.10.0.127 10.10.0.130 10.10.0.131 10.10.0.137 10.10.0.138 10.10.0.146 10.10.0.158 10.10.0.159 10.10.0.166 10.10.0.168 10.10.0.174 10.10.0.177 10.10.0.178 10.10.0.188 10.10.0.190 10.10.0.217 10.10.0.227 10.10.0.236 10.10.0.240 10.10.0.243 10.10.0.251 10.10.0.253 10.10.0.254

80 addresses in this subnet have a page; the most looked-up are listed here.