10.10.0.10 router login
To open the admin panel, type 10.10.0.10 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.10.0.10 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password can be listed for 10.10.0.10, and no specific vendor is known to ship this address as a factory gateway. Whatever answers here has its own defaults, printed on the label underneath or on the rear of the unit, or set out in its quick-start guide. On managed corporate equipment the credentials are usually held by whoever built the network.
How to log in to your router
Type 10.10.0.10 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.10.0.10, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the login is unknown, ask the network owner before touching the hardware. A factory reset — commonly a recessed button held for roughly ten to thirty seconds — restores the label credentials but discards every custom setting: static leases, port forwards, firewall rules, VLANs, and the Wi-Fi name and password, which revert to the printed values. Every connected client then has to rejoin.
10.10.0.10 belongs to 10.0.0.0/8, the largest of the three RFC 1918 private ranges. With a netmask of 255.0.0.0 it spans 16,777,216 addresses, which is why it is favoured by corporate and campus networks, ISP-managed CPE, carrier equipment, VPN pools and container platforms. Almost nobody routes a flat /8, so the practical unit here is the /24 it sits in: 10.10.0.0/24, usable from 10.10.0.1 to 10.10.0.254, with 10.10.0.255 reserved as the broadcast address.
As the tenth host slot in that subnet, this is not the position a gateway usually takes; routers are conventionally placed at the first or last usable address. A low, round number like .10 is far more often a hand-assigned host — a server, a printer, an access point or a management interface. Most people arriving here typed the address into a browser after seeing it in a DHCP table, an ARP listing or a network diagram, and want to know what answers on it. Seventy-nine other addresses in the same /24 have documentation of their own.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.10.0.0/24
The 10.10.0.0/24 subnet runs from 10.10.0.1 to 10.10.0.254, with 10.10.0.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
80 addresses in this subnet have a page; the most looked-up are listed here.