10.10.1.3 router login

http://10.10.1.3 ↗

To open the admin panel, type 10.10.1.3 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.1.3 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is recorded for 10.10.1.3, and none can be. A private address carries no manufacturer identity, so nothing about 10.10.1.3 itself indicates what is answering on it or what that device shipped with. The defaults belong to the hardware, not the address. Look for them on the label or sticker on the underside or rear of the unit, in the printed or downloadable manual for that exact model, or in documentation supplied by the ISP for equipment they provisioned. On a managed network, credentials are commonly changed during provisioning, so the administrator's records are the reliable source.

How to log in to your router

  1. Type 10.10.1.3 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.1.3, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Before resetting, try the recovery paths: a password-reset option on the login screen, a local console or serial connection, a saved configuration backup, or a network administrator who holds the credentials. A factory reset is costly on a device at this position. It clears VLANs, static routes, static DHCP reservations, firewall and port-forward rules, Wi-Fi network names and passphrases, and any ISP connection settings, all of which must be re-entered. It also commonly returns the device to DHCP, so it may no longer answer at 10.10.1.3 afterwards. No vendor is known to ship this address, so follow the reset procedure in that device's own documentation rather than a generic button-and-hold sequence.

10.10.1.3 is a private IPv4 address from 10.0.0.0/8, the largest of the three RFC 1918 ranges, defined by a netmask of 255.0.0.0 and holding 16,777,216 addresses. Addresses in this block are not routed on the public internet and carry no registrant, owner, ISP or geographic location; the same address can be in use at the same moment on thousands of unrelated networks. The block is common in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, where the space is subnetted far below /8.

Within that block, 10.10.1.3 falls in the 10.10.1.0/24 subnet, whose usable host range is 10.10.1.1 to 10.10.1.254, with 10.10.1.255 reserved as the broadcast address. It is the third address in that subnet. Gateways are more often placed at the first or last usable address, so on many networks a host at .3 is a statically assigned device — a server, controller, access point, printer or management interface — sitting just above the gateway in a range excluded from DHCP.

Most people looking this address up have found it in a client list, a DHCP lease table, an ARP table or a configuration file, or have typed it into a browser and reached a login prompt. Roughly 438 searches a year reach it, and 60 other addresses in the same /24 attract enough interest to be documented separately.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.1.0/24
Usable10.10.1.1 – 10.10.1.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.10.1.0/24

The 10.10.1.0/24 subnet runs from 10.10.1.1 to 10.10.1.254, with 10.10.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

10.10.1.2 10.10.1.6 10.10.1.40 10.10.1.4 10.10.1.1 10.10.1.7 10.10.1.65 10.10.1.92

All addresses we cover here
10.10.1.0 10.10.1.1 10.10.1.2 10.10.1.4 10.10.1.5 10.10.1.6 10.10.1.7 10.10.1.12 10.10.1.14 10.10.1.16 10.10.1.20 10.10.1.24 10.10.1.28 10.10.1.29 10.10.1.30 10.10.1.40 10.10.1.45 10.10.1.48 10.10.1.52 10.10.1.53 10.10.1.55 10.10.1.61 10.10.1.65 10.10.1.71 10.10.1.73 10.10.1.77 10.10.1.78 10.10.1.80 10.10.1.81 10.10.1.82 10.10.1.83 10.10.1.84 10.10.1.85 10.10.1.88 10.10.1.91 10.10.1.92 10.10.1.95 10.10.1.101 10.10.1.102 10.10.1.105 10.10.1.121 10.10.1.125 10.10.1.136 10.10.1.150 10.10.1.168 10.10.1.176 10.10.1.181 10.10.1.195 10.10.1.203 10.10.1.205 10.10.1.214 10.10.1.223 10.10.1.227 10.10.1.231 10.10.1.235 10.10.1.237 10.10.1.246 10.10.1.251 10.10.1.252 10.10.1.254

61 addresses in this subnet have a page; the most looked-up are listed here.