10.10.1.40 router login
To open the admin panel, type 10.10.1.40 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.10.1.40 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default credentials are documented for 10.10.1.40. On a purpose-numbered segment like this, whatever answers here was almost certainly commissioned by an administrator, and stock passwords tend to be replaced during commissioning. For equipment you own, the factory account is on the device label or in the model's manual. For equipment on an employer's or a client's network, the account you need is issued rather than guessed; ask the network owner, and do not attempt logins on hardware you are not responsible for.
How to log in to your router
Type 10.10.1.40 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.10.1.40, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Try the ordinary recovery paths first — a directory or single sign-on account, a saved credential in a password manager, or a colleague with working access. Factory resetting the device would clear its password but also its addressing, so it would drop off 10.10.1.0/24 and stop serving whatever depends on it, alongside losing routes, filtering rules, certificates and logging configuration. Where a reset is unavoidable, take a configuration backup while the interface still responds, and check whether the model offers password-only recovery through its console port.
10.10.1.40 belongs to 10.10.1.0/24, a subnet carved out of 10.0.0.0/8. With a 255.0.0.0 netmask and 16,777,216 addresses, that block is the largest RFC 1918 range and the one used across corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks, always divided into far smaller segments in practice.
A 10.10.1.x network reads like a designed plan rather than a factory default: the repeated 10 is a convention for an organisation or site, and the third octet distinguishes one internal segment from the next. Usable hosts run 10.10.1.1 to 10.10.1.254, with 10.10.1.255 reserved for broadcast, and the gateway on such a segment would conventionally be .1 or .254 rather than an address in the middle.
Position 40 is a client or service number, the kind of value found in a reserved band for servers and appliances or partway into a DHCP scope. Visitors are typically remote workers or staff who have been pointed at this address for an internal tool or a device console and need to understand what they are connecting to.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.10.1.0/24
The 10.10.1.0/24 subnet runs from 10.10.1.1 to 10.10.1.254, with 10.10.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
61 addresses in this subnet have a page; the most looked-up are listed here.