10.10.100.152 router login
To open the admin panel, type 10.10.100.152 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.10.100.152 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
There is no recorded default username and password for this address, and inventing one would be unhelpful given the variety of hardware that could hold it. Check the label or asset tag on the physical unit, the manufacturer's manual, or the provisioning notes for the network. Where the network is centrally managed, the credentials are likely held in a password vault rather than on the device.
How to log in to your router
Type 10.10.100.152 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.10.100.152, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Password recovery on managed hardware sometimes runs through a serial console rather than a reset button, so consult the documentation before resorting to the button. A factory reset does restore access, at the cost of the entire configuration: interfaces, routing, monitoring agents and access control all revert, and any wireless name and password return to the label defaults.
10.10.100.152 belongs to 10.0.0.0/8, the largest private range under RFC 1918, spanning 16,777,216 addresses with a 255.0.0.0 netmask. Its scale suits organisations that need structure — corporate and campus networks, carrier equipment, VPN pools and orchestration platforms — and it is invariably divided into far smaller subnets in practice.
The address operates within 10.10.100.0/24, where hosts occupy 10.10.100.1 through 10.10.100.254 and 10.10.100.255 serves as the broadcast address. The repeated 10.10 prefix followed by a round 100 is characteristic of a hand-designed addressing scheme, often marking a specific site, tenant or equipment class. Host 152 sits in the middle of the range, the sort of position a DHCP server hands out to ordinary endpoints. People searching for it are generally identifying a machine seen in logs, a management console or an inventory scan.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.10.100.0/24
The 10.10.100.0/24 subnet runs from 10.10.100.1 to 10.10.100.254, with 10.10.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
All addresses we cover here
51 addresses in this subnet have a page; the most looked-up are listed here.