10.10.100.245 router login

http://10.10.100.245 ↗

To open the admin panel, type 10.10.100.245 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.10.100.245 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No username and password combination is on record for 10.10.100.245. Private addresses are reused freely across unrelated networks, so no credential could be valid for the address as such, only for a particular piece of hardware.

To find the correct defaults, work from the device outward. The label on the case usually prints the model, serial and, where applicable, an initial login. Failing that, the printed setup guide or the manufacturer's online documentation for that exact model will state whether factory credentials exist or whether the first login forces you to create your own.

How to log in to your router

  1. Type 10.10.100.245 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.10.100.245, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

A device on a statically reserved address is often one other systems depend on, so weigh a factory reset carefully. Check first for a serial or console connection, a saved configuration file, or an administrator who holds the password.

Resetting returns the unit to its shipping state and discards its configuration in full, including the static assignment that puts it at 10.10.100.245. Plan to reconnect on whatever address it defaults to, then reapply the settings. Because no vendor is associated with this address, the correct reset method is the one in your own device's documentation, not a general procedure copied from elsewhere.

10.10.100.245 falls within 10.0.0.0/8, private address space that RFC 1918 reserves for internal use. Its netmask of 255.0.0.0 describes 16,777,216 possible addresses, a range so large that it is used almost exclusively in subnetted form: corporate and campus networks, provider-managed home equipment, carrier systems, VPN pools and container networking all draw on it.

The address lives in 10.10.100.0/24, where hosts may occupy 10.10.100.1 to 10.10.100.254 and 10.10.100.255 serves as the broadcast address. Position 245 is near the very top of the range. Administrators often treat the tail end of a /24 differently from the middle, reserving it for static assignments, reserved leases, spare capacity, test systems or infrastructure deliberately kept clear of the dynamic pool. That is a convention rather than a rule, and nothing about the number itself confirms what is there.

We document 50 other addresses in the same subnet. This one attracts roughly 125 lookups a year, most often from someone comparing a scan result or log entry against what they expect to be running near the top of their address range.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.10.100.0/24
Usable10.10.100.1 – 10.10.100.254

Whois information for 10.0.0.0/8
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 10.10.100.0/24

The 10.10.100.0/24 subnet runs from 10.10.100.1 to 10.10.100.254, with 10.10.100.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

All addresses we cover here
10.10.100.0 10.10.100.1 10.10.100.2 10.10.100.5 10.10.100.6 10.10.100.7 10.10.100.8 10.10.100.9 10.10.100.10 10.10.100.11 10.10.100.12 10.10.100.13 10.10.100.20 10.10.100.21 10.10.100.23 10.10.100.25 10.10.100.26 10.10.100.33 10.10.100.38 10.10.100.54 10.10.100.77 10.10.100.81 10.10.100.88 10.10.100.91 10.10.100.99 10.10.100.100 10.10.100.101 10.10.100.106 10.10.100.108 10.10.100.110 10.10.100.122 10.10.100.123 10.10.100.124 10.10.100.150 10.10.100.151 10.10.100.152 10.10.100.153 10.10.100.154 10.10.100.155 10.10.100.200 10.10.100.225 10.10.100.234 10.10.100.235 10.10.100.243 10.10.100.244 10.10.100.246 10.10.100.248 10.10.100.252 10.10.100.253 10.10.100.254

51 addresses in this subnet have a page; the most looked-up are listed here.