192.168.10.11 router login
To open the admin panel, type 192.168.10.11 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.10.11 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default credential pair is on record for this address. Devices given fixed low addresses are often appliances with their own account systems, sometimes configured during first-run setup rather than shipped with a factory password. Check the label, the setup documentation, or the installer notes for the unit itself; where a first-run wizard set the password, only whoever ran it knows the value.
How to log in to your router
Type 192.168.10.11 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.10.11, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Recovering a forgotten password usually means holding the reset control until the status lights cycle, which returns the unit to shipping defaults. That step throws away the static address it was given, along with schedules, user accounts and any integration settings, and on wireless equipment the network name and key drop back to the printed defaults, so plan the reconfiguration before pressing anything.
192.168.10.11 sits inside 192.168.0.0/16, a private range of 65,536 addresses masked with 255.255.0.0. The consumer block. Nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Administrators frequently move away from the busiest neighbourhoods of this block, and a tenth subnet is a common result of that choice.
Here the relevant subnet is 192.168.10.0/24, addressable from 192.168.10.1 to 192.168.10.254 with broadcast traffic on 192.168.10.255. The final octet, 11, is a low host number of the sort often assigned by hand to a server, a network printer, a camera recorder or a managed switch rather than left to automatic allocation. Someone reading about it is typically documenting a small network, or trying to reach a management interface they know exists somewhere on this segment.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.10.0/24
The 192.168.10.0/24 subnet runs from 192.168.10.1 to 192.168.10.254, with 192.168.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
197 addresses in this subnet have a page; the most looked-up are listed here.