192.168.10.13 router login

http://192.168.10.13 ↗

To open the admin panel, type 192.168.10.13 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.10.13 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is documented for 192.168.10.13. That is expected rather than a gap in the record: the address is a private one that any device on any network may be assigned, so credentials belong to whatever hardware happens to hold it, not to the number itself. Check the printed label on the device's underside or rear panel, where defaults are commonly given alongside the serial number and default Wi-Fi key, then its manual or the manufacturer's support pages. On ISP-supplied equipment the credentials are often unique per unit and appear in the paperwork that came with the service.

How to log in to your router

  1. Type 192.168.10.13 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.10.13, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the interface at this address rejects your credentials, first confirm which device actually holds the address by checking your router's DHCP client list, which usually reports a hostname and MAC address alongside the lease. That often identifies the hardware well enough to locate the right documentation. No vendor is known to ship 192.168.10.13 as a default gateway, so no vendor-specific reset procedure applies here. A factory reset, commonly triggered by holding a recessed button for several seconds while the unit is powered, is a genuine last resort: it clears static addressing, so the device is likely to return on a different address, and it discards Wi-Fi settings, port forwards and any other configuration.

192.168.10.13 is a private IPv4 address drawn from 192.168.0.0/16, the RFC 1918 range reserved for local networks. With a netmask of 255.255.0.0 the block holds 65,536 addresses, none of which are routable on the public internet. This is the consumer block: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Because the space is reserved rather than assigned, the same address is in simultaneous use on countless unrelated networks, and it carries no owner, ISP, registrant or geographic location of its own.

Within that block this address sits in the 192.168.10.0/24 subnet, whose usable host range runs from 192.168.10.1 to 192.168.10.254 with 192.168.10.255 reserved for broadcast. It occupies position 13 in the subnet, well away from the low positions that routers commonly claim for themselves, so on most networks using this range 192.168.10.13 belongs to a client rather than to the gateway. Typical occupants at that depth are DHCP-assigned laptops and phones, or a device given a static lease so that it keeps a predictable address: a printer, a network camera, a NAS, an access point in bridge mode, or a smart-home hub.

People who look up this address are usually trying to reach a management interface at it, having found it in a router's client list, a DHCP lease table or a network scan, and want to know what sort of device answers there and how to log in.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.10.0/24
Usable192.168.10.1 – 192.168.10.254

Whois information for 192.168.0.0/16
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

Other documented addresses in 192.168.10.0/24

The 192.168.10.0/24 subnet runs from 192.168.10.1 to 192.168.10.254, with 192.168.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.

Most looked up in this subnet

192.168.10.110 192.168.10.4 192.168.10.254 192.168.10.1 192.168.10.5 192.168.10.3 192.168.10.7 192.168.10.2

All addresses we cover here
192.168.10.1 192.168.10.2 192.168.10.3 192.168.10.4 192.168.10.5 192.168.10.6 192.168.10.7 192.168.10.9 192.168.10.10 192.168.10.11 192.168.10.12 192.168.10.14 192.168.10.15 192.168.10.16 192.168.10.17 192.168.10.18 192.168.10.20 192.168.10.21 192.168.10.24 192.168.10.27 192.168.10.28 192.168.10.32 192.168.10.34 192.168.10.41 192.168.10.51 192.168.10.54 192.168.10.56 192.168.10.64 192.168.10.75 192.168.10.81 192.168.10.83 192.168.10.93 192.168.10.95 192.168.10.97 192.168.10.100 192.168.10.101 192.168.10.102 192.168.10.103 192.168.10.104 192.168.10.105 192.168.10.106 192.168.10.108 192.168.10.109 192.168.10.110 192.168.10.114 192.168.10.124 192.168.10.126 192.168.10.132 192.168.10.145 192.168.10.147 192.168.10.153 192.168.10.166 192.168.10.194 192.168.10.200 192.168.10.227 192.168.10.231 192.168.10.247 192.168.10.252 192.168.10.253 192.168.10.254

197 addresses in this subnet have a page; the most looked-up are listed here.