10.0.11.112 router login

To open the admin panel, type 10.0.11.112 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.11.112 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default username and password pair is recorded for 10.0.11.112, and none should be assumed, since any device on any private network can hold this address. If the equipment that answers here has a web login, its own defaults are normally printed on a label on the underside or rear panel, alongside the serial number, or listed in the model-specific manual.

How to log in to your router

  1. Type 10.0.11.112 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.11.112, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Where the login is genuinely unknown, most equipment offers a recessed reset button held for roughly ten to thirty seconds while powered on. That returns the unit to factory state and discards everything configured on it, including port forwarding, static leases and access rules. On wireless devices the network name and key revert to the values printed on the label, so every connected client must be rejoined.

10.0.11.112 belongs to 10.0.0.0/8, the largest of the three RFC 1918 private ranges, carrying a 255.0.0.0 netmask and 16,777,216 addresses. None of it is routed on the public internet, so this exact figure can be live on countless unrelated networks at once — corporate and campus LANs, ISP-managed CPE, carrier-grade equipment, VPN address pools and container networks, all of which subnet the /8 far below its native size.

In practice the address is read as part of 10.0.11.0/24, where usable hosts run from 10.0.11.1 to 10.0.11.254 and 10.0.11.255 is the broadcast address. Host position 112 sits in the middle of that span, the region DHCP servers commonly hand out, rather than the low position a router usually claims. Someone arriving here has often found the address in a device list or ARP table and wants to know what answers on it. A further 79 addresses in this /24 are documented separately.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.11.0/24
Usable10.0.11.1 – 10.0.11.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN