10.0.11.244 router login
To open the admin panel, type 10.0.11.244 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.11.244 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
This address has no recorded default username or password, and none should be assumed. The device answering on 10.0.11.244 will have its own: the underside label, the packaging insert and the model's manual are the places to check. If it was installed by an IT team or supplied by a service provider, the credentials were likely set at deployment and only they will have them.
How to log in to your router
Type 10.0.11.244 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.11.244, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
Where the password cannot be recovered, resetting to factory defaults is the standard last resort, done by holding the reset button for the interval the manual specifies. Be clear on the consequences: all configuration is wiped, including any static address that placed the device here, and wireless settings fall back to the network name and key printed on the label, dropping every connected client.
As a member of 10.0.0.0/8, 10.0.11.244 comes from the RFC 1918 range that spans 16,777,216 addresses behind a 255.0.0.0 netmask. Corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container platforms all draw on it, invariably splitting it into far smaller subnets than the /8 implies. This address operates inside 10.0.11.0/24, which supports hosts 10.0.11.1 through 10.0.11.254 and reserves 10.0.11.255 for broadcasts.
With 244 as the host number, the address sits in the final stretch of the subnet, just short of the broadcast boundary. High positions like this are often kept outside the DHCP pool for statically addressed infrastructure, though plenty of networks simply let leases run to the top. It is not a position gateways normally use. People generally look it up after an inventory scan or a router's device list turned it up. The subnet has 79 other documented addresses.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.11.0/24
The 10.0.11.0/24 subnet runs from 10.0.11.1 to 10.0.11.254, with 10.0.11.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
80 addresses in this subnet have a page; the most looked-up are listed here.