10.0.11.120 router login

To open the admin panel, type 10.0.11.120 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.11.120 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default credential pair is known for 10.0.11.120, so this page will not supply one. The authoritative source is the hardware itself: check the sticker on the base or back, the printed setup guide, and the manual for the specific model. Managed or provider-issued devices frequently ship with unique per-unit passwords, which makes any generic pair wrong by definition.

How to log in to your router

  1. Type 10.0.11.120 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.11.120, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If the password is unrecoverable, a factory reset restores access on most devices — usually a long press of the reset control until the indicator lights change. The trade is that the unit returns to its shipped state: every setting you or an administrator applied is gone, and the Wi-Fi name and passphrase revert to the label values, so each connected client must be reconfigured afterwards.

10.0.11.120 falls inside 10.0.0.0/8, the largest RFC 1918 block, with a 255.0.0.0 netmask covering 16,777,216 addresses. Its heaviest use is in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container networks, where the space is subnetted far below /8. The immediate subnet is 10.0.11.0/24, whose usable addresses run 10.0.11.1 to 10.0.11.254 and whose broadcast address is 10.0.11.255.

A third octet of 11 suggests a numbered segment in a larger scheme — the kind of layout where each VLAN, department or site gets its own /24. Host 120 lands in the middle of that segment, well clear of the low addresses routers usually claim, so it commonly belongs to a workstation, phone or embedded device holding a DHCP lease. Most visitors are trying to match the address to a physical machine, or to reach an admin interface someone said was here. 79 other addresses in this subnet are documented.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.11.0/24
Usable10.0.11.1 – 10.0.11.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN