10.0.13.136 router login
To open the admin panel, type 10.0.13.136 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.13.136 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password pair is documented for this address, and none should be assumed, since private addresses are assigned by whoever runs the network rather than by a manufacturer. Look for the device's own defaults on the label or sticker on its underside or rear panel, in the printed or online manual for that exact model, or in the documentation supplied by the ISP that provided the equipment.
How to log in to your router
Type 10.0.13.136 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.13.136, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the password was changed and is not recorded, check whether the network administrator or ISP holds it before doing anything drastic. A factory reset, commonly a press and hold of a recessed button for around ten seconds, restores access but discards custom configuration: port forwarding, DHCP reservations, firewall rules and DNS settings are lost, and the Wi-Fi name and password revert to the values printed on the label.
10.0.13.136 sits inside 10.0.0.0/8, the largest of the three RFC 1918 private ranges, with a netmask of 255.0.0.0 and 16,777,216 addresses. That block is unallocated on the public internet and reusable by anyone, so no location, ISP or owner can be attached to it. In practice a /8 is never deployed flat: it is subnetted far below its native size, and it turns up in corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container or orchestration networks.
Within the likely /24 here, 10.0.13.0/24, usable hosts run from 10.0.13.1 to 10.0.13.254 with 10.0.13.255 as the broadcast address. This address is host 136 in that range, which is not one of the low positions a gateway is commonly assigned, so it more often belongs to a client, server or appliance than to the router itself. Most people arriving here are trying to reach a device's web interface, or to identify what is answering on this address.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.13.0/24
The 10.0.13.0/24 subnet runs from 10.0.13.1 to 10.0.13.254, with 10.0.13.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
101 addresses in this subnet have a page; the most looked-up are listed here.