10.0.13.222 router login
To open the admin panel, type 10.0.13.222 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
10.0.13.222 router passwords
Where to find them:
- The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
- The quick-start card or manual that came in the box.
- Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.
No default username and password are documented for this address, and none should be assumed. Private addresses carry no vendor identity, so credentials depend entirely on the device that answered. Check the label on its underside or rear panel, the quick-start card in the box, or the manual for that exact model number. Equipment supplied by an ISP often uses per-unit credentials printed only on the sticker.
How to log in to your router
Type 10.0.13.222 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 10.0.13.222, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If the password is unknown, first try any admin account your organisation or household set up, since a device at this position is more likely a managed client than a router. A hardware reset, usually a recessed button held for around ten seconds, is a last resort: it erases every custom setting, port forward and static assignment, and returns the Wi-Fi name and key to the values printed on the label.
The address 10.0.13.222 sits inside 10.0.0.0/8, the largest of the three private ranges reserved by RFC 1918, with netmask 255.0.0.0 and 16,777,216 addresses in total. Almost nobody uses that /8 as one flat network. It is the range picked by corporate and campus networks, ISP-managed CPE, carrier-grade equipment, VPN address pools and container platforms, all of which chop it into far smaller pieces.
Here the working piece is 10.0.13.0/24, which offers 10.0.13.1 through 10.0.13.254 for hosts and reserves 10.0.13.255 for broadcast. At host position 222 the address falls high in that range, well away from the low positions administrators usually reserve for gateways and infrastructure, and firmly inside the territory a DHCP server hands out. Most people looking this address up have seen it on a client list, in a firewall log or in an ARP table and want to know which machine it belongs to.
Whois information for 10.0.0.0/8
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent: ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 10.0.13.0/24
The 10.0.13.0/24 subnet runs from 10.0.13.1 to 10.0.13.254, with 10.0.13.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
101 addresses in this subnet have a page; the most looked-up are listed here.