10.0.13.8 router login

To open the admin panel, type 10.0.13.8 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

10.0.13.8 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

There is no known default credential pair tied to 10.0.13.8. Private addresses are reused freely on unrelated networks, so no username or password can be inferred from the number alone. If the device at this address asks for a login, the defaults come from the device itself: its label, its printed setup guide, its downloadable manual, or documentation supplied by the network operator.

How to log in to your router

  1. Type 10.0.13.8 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 10.0.13.8, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

When the password is genuinely unknown, look for the device's own recovery path before touching anything physical, since some equipment offers a recovery account or a local console login. Holding the reset button restores factory state and wipes every configured setting, from static routes to access lists, and returns any wireless network name and key to whatever the label shows.

The address 10.0.13.8 belongs to 10.0.0.0/8. With a natural netmask of 255.0.0.0 and 16,777,216 addresses, this range is far too large to use as one flat network, so it is habitually split into smaller subnets across corporate and campus sites, ISP-supplied customer equipment, carrier platforms, VPN address pools and container or orchestration networks.

Within the /24 that contains it, 10.0.13.0/24, usable addresses run from 10.0.13.1 to 10.0.13.254 and 10.0.13.255 serves as broadcast. This address occupies position 8, low in the range but past the first few slots that network administrators typically reserve for routers and core infrastructure. Low-numbered hosts like this one are often assigned deliberately rather than by DHCP, which is why they tend to belong to servers, controllers or management interfaces. Visitors usually arrive after finding 10.0.13.8 in a configuration file, a scan result or a connection log.

Block10.0.0.0/8
Netmask255.0.0.0
Subnet10.0.13.0/24
Usable10.0.13.1 – 10.0.13.254

Whois information for 10.0.0.0/8

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 10.0.0.0 - 10.255.255.255
CIDR: 10.0.0.0/8
NetName: PRIVATE-ADDRESS-ABLK-RFC1918-IANA-RESERVED
NetHandle: NET-10-0-0-0-1
Parent:  ()
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1995-06-23
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/10.0.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN