192.168.1.104 router login

To open the admin panel, type 192.168.1.104 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.1.104 router passwords

One default username and password pair has been reported for devices answering on 192.168.1.104.

Username / Password Percentage
admin / 420008 100%

One credential pair is on record as being reported for this address: the username admin with the password 420008. That is a report about devices seen at this address, not a property of the address itself, and it will not apply to most equipment answering on 192.168.1.104. No specific vendor is known to ship this address as a default gateway, so there is no manufacturer default set to fall back on.

If that pair does not work, read the credentials off the device rather than guessing: check the sticker or label on the unit, the printed or online manual for that model, and any documentation supplied by the ISP if the equipment came from them.

How to log in to your router

  1. Type 192.168.1.104 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.1.104, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

If no credentials work, the remaining option is a factory reset, usually a recessed button held for roughly ten to thirty seconds while the device is powered on. Since no vendor is known for this address, the exact hold time and button location have to come from the device's own label or manual. Weigh the cost first: a reset erases the Wi-Fi name and password, any port forwarding, static leases, firewall rules and ISP connection settings, and the network stays down until it is reconfigured. On ISP-supplied equipment, confirm you have the connection details, or can obtain them, before resetting.

192.168.1.104 is a private IPv4 address drawn from 192.168.0.0/16, the block RFC 1918 sets aside for private use. Addresses in that block, 65,536 of them under the netmask 255.255.0.0, are not routed on the public internet and carry no owner, registrant or location: the same address is in use on millions of separate networks at the same time, and traffic to it never leaves the local network. This particular block is the consumer range. Nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter.

Within the block, the address sits in the 192.168.1.0/24 subnet, whose usable range runs from 192.168.1.1 to 192.168.1.254 with 192.168.1.255 reserved as the broadcast address. It is the 104th host position in that subnet. That position is not one routers commonly take for themselves; gateways usually sit at the low end of the range. An address this far into the subnet is far more often a DHCP lease handed to a client, a laptop, phone, printer, camera, NAS or smart-home device, than the router itself.

Most people looking up 192.168.1.104 are trying to open its web interface in a browser, having found the address in a router's client list, on a device label or in network-scanner output.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.1.0/24
Usable192.168.1.1 – 192.168.1.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN