192.168.1.3 router login
To open the admin panel, type 192.168.1.3 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.1.3 router passwords
One default username and password pair has been reported for devices answering on 192.168.1.3.
| Username / Password | Percentage |
|---|---|
| blank / 1234 | 100% |
No router vendor is known to ship 192.168.1.3 as a factory default gateway, so there is no vendor default credential set that can be attributed to this address. The only credential pattern reported for it is a blank username with the password 1234, and that reflects what visitors have described rather than any manufacturer specification. Treat it as one thing to try, not as the answer. Because this address is more often a client or a manually assigned device than a stock gateway, its login is frequently one someone configured. The reliable source is the device itself: the sticker or label on its underside or rear panel, its printed or downloadable manual, or the documentation supplied by an ISP for equipment they provided.
How to log in to your router
Type 192.168.1.3 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.1.3, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
If no password works, first confirm what is actually on 192.168.1.3 before resetting anything. Check the connected-clients list on your router's administration page, which maps addresses to device names and MAC addresses, and note that the MAC prefix identifies the manufacturer. That tells you whose recovery procedure applies. A factory reset is genuinely destructive: it clears the administrator password along with Wi-Fi network names and keys, port forwarding, static leases, VPN profiles and any ISP-specific provisioning, so devices reconnect only after you rebuild the configuration. On many devices the reset is a recessed button held roughly ten to thirty seconds while powered on. Export or photograph the current settings first, and check whether the device offers a password recovery option that stops short of a full reset.
192.168.1.3 is a private IPv4 address drawn from 192.168.0.0/16, the RFC 1918 range reserved for private use and defined by a 255.255.0.0 netmask across 65,536 addresses. This block is the consumer range: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Because the address is private, it is not routable on the public internet and carries no owner, registrant, ISP or location. The same address is in simultaneous use on millions of unrelated networks, and only the network you are currently attached to determines what answers on it.
Within that block the address sits in the 192.168.1.0/24 subnet, whose usable host range runs from 192.168.1.1 to 192.168.1.254 with 192.168.1.255 reserved as the broadcast address. 192.168.1.3 occupies the third position in that subnet, which is not a typical gateway slot; on most networks the router takes .1 or .254, and the low addresses just above it are commonly handed out by DHCP or assigned statically to devices such as printers, network storage, cameras, access points or a second router in bridge mode.
Most people arriving at this address are trying to open a login page they saw in an app, on a label, or in a list of connected clients, and want to know what device is actually answering.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.1.0/24
The 192.168.1.0/24 subnet runs from 192.168.1.1 to 192.168.1.254, with 192.168.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.