192.168.1.106 router login

To open the admin panel, type 192.168.1.106 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.1.106 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No default credentials are documented for 192.168.1.106, and inventing a pair would be worse than useless. Whatever answers on a lease address near the start of the DHCP pool is a client device, and its sign-in details, where it has any, come from its own manufacturer.

Start by working out what the device is, then check the printed label, the setup card that came with it, or the manufacturer's manual. Devices supplied by an internet provider often have credentials listed in that provider's installation documentation instead.

How to log in to your router

  1. Type 192.168.1.106 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.1.106, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Bear in mind that a DHCP-assigned address is not a stable identifier. If a login page here refuses your password, confirm through the router's lease table that the address still belongs to the device you have in mind before going further.

A factory reset erases all of a device's settings, so weigh it against the reconfiguration work it creates. If the device turns out to be one you want at a fixed address, the better long-term fix is a DHCP reservation on the router, which pins the same address to that device without taking it outside the pool.

The subnet 192.168.1.0/24 is the most widely deployed private network segment in home and small office use, and 192.168.1.106 is one of its 254 usable hosts. Addresses run from 192.168.1.1 up to 192.168.1.254, with 192.168.1.255 carrying broadcast traffic. The enclosing range is 192.168.0.0/16, an RFC 1918 block of 65,536 addresses using the mask 255.255.0.0, reserved for private use and never routed across the public internet.

Host 106 is not a gateway position. Consumer routers commonly begin their DHCP pool around .100, which puts this address among the first few leases handed out after a reboot. In practice that makes it one of the addresses most likely to be occupied on a busy home network, and also one of the most likely to change hands between devices over time.

Because the same subnet is in use on millions of separate networks, nothing about this address identifies a particular device anywhere. Visitors typically arrive after spotting it in a router's client list, a printer's network report or a scan, and want to know what it is and whether they can log in to it.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.1.0/24
Usable192.168.1.1 – 192.168.1.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN