192.168.1.112 router login

To open the admin panel, type 192.168.1.112 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.1.112 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

There is no recorded default username and password for this address. Nothing about a mid-subnet address in 192.168.1.0/24 identifies a product, and credentials do not travel between products, so the only dependable answer is the one attached to your own hardware. Check the sticker, then the printed setup sheet, then the manual or vendor download page. If the equipment was supplied by an internet provider, the active credentials may have been set during provisioning and published in the provider's own support material.

How to log in to your router

  1. Type 192.168.1.112 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.1.112, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

A factory reset restores access on most devices when the password is unrecoverable, and the method varies enough that the device's manual is the right reference rather than any generic instruction. What it costs is the configuration: user accounts, saved preferences, network settings and, importantly, any manual address assignment. A device reset while holding 192.168.1.112 will usually come back on whatever the DHCP server offers, which may be a different address entirely. Note what else on the network points at it before you start, so you can repoint those references afterwards.

192.168.1.112 is an address in 192.168.0.0/16, the RFC 1918 range aimed at consumer and small-office equipment. Under a 255.255.0.0 mask it spans 65,536 addresses, and it is the range nearly every home gateway, hotspot and compact access point selects for its local side. Private allocation means the address is unowned and unregistered; identical copies of it are in service worldwide at any moment.

The containing subnet is 192.168.1.0/24, running from 192.168.1.1 to 192.168.1.254 with 192.168.1.255 as the broadcast address. At position 112 the address sits in the middle band of the subnet, far from the low-numbered slots that routers usually claim. Addresses in this region are most often dynamic leases, since a great many gateways open their DHCP pool in the tens or low hundreds and work upward, though the same slot is sometimes reserved for a device that needs a predictable address.

Every one of the 254 host positions in this subnet is documented here. Visitors generally reach this page after finding the address on a connected-device list, in a scan, or in an application setting, and want to establish whether it is worth trying to open in a browser.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.1.0/24
Usable192.168.1.1 – 192.168.1.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN