192.168.1.30 router login
To open the admin panel, type 192.168.1.30 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.
192.168.1.30 router passwords
2 default username and password pairs have been reported for devices answering on 192.168.1.30, ordered by how often each one is seen.
| Username / Password | Percentage |
|---|---|
| admin / Model#ofcamera | 50% |
| admin / blank | 50% |
Two login combinations have been reported for devices reached at this address, each accounting for about half of the reports: the username admin with the password Model#ofcamera, and the username admin with a blank password left empty. Neither is guaranteed for your particular unit. If both fail, check the device's own label or documentation, which is authoritative for the hardware in front of you.
How to log in to your router
Type 192.168.1.30 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 192.168.1.30, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
If you do not know the password
When no working password remains, a factory reset is the fallback. Hold the recessed reset pinhole for the interval the manual specifies while power is applied. Understand the cost first: custom settings are wiped, including any DHCP reservations, remote access rules and firmware preferences, and the wireless network name and passphrase drop back to the values printed on the device label.
The address 192.168.1.30 belongs to 192.168.0.0/16, a private range set aside by RFC 1918 and covering 65,536 addresses under a 255.255.0.0 mask. It is the consumer block, the one that home routers, hotspots and small office access points overwhelmingly draw their default gateways from, which is why the numbers in it feel familiar to so many people. Because it is private space, the same address is reused freely on millions of unrelated networks at once.
Its subnet, 192.168.1.0/24, offers 192.168.1.1 through 192.168.1.254 for hosts and reserves 192.168.1.255 for broadcast traffic. Position 30 is not one of the low host numbers a gateway normally occupies; it falls comfortably inside the pool a DHCP server typically hands out, or the sort of tidy round number an administrator picks when pinning a printer, NAS or access point to a fixed address. Visitors usually reach this page after spotting the address on a device screen or in a router's client table.
Whois information for 192.168.0.0/16
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN
Other documented addresses in 192.168.1.0/24
The 192.168.1.0/24 subnet runs from 192.168.1.1 to 192.168.1.254, with 192.168.1.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
Most looked up in this subnet
All addresses we cover here
255 addresses in this subnet have a page; the most looked-up are listed here.