192.168.1.62 router login

To open the admin panel, type 192.168.1.62 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.1.62 router passwords

Where to find them:

  • The label on the underside or back of the router — most manufacturers print the default admin username, password and Wi-Fi key there.
  • The quick-start card or manual that came in the box.
  • Your ISP's account portal, if the device was supplied by them — many set a unique password per line rather than a shared default.

No username and password pair is on record for 192.168.1.62, so this page does not offer one. The address is a lease slot, not a product, and any credential tied to it would be a guess about a device that may have changed since you last looked.

Get the defaults from the hardware instead. Consumer equipment prints them on a base or rear label, on a pull-out card, or in the first pages of the quick-start guide. If the device came from an internet provider, its credentials are often provider-specific and documented in the account area rather than publicly.

How to log in to your router

  1. Type 192.168.1.62 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.1.62, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Understand the cost first. A factory reset returns the device to its shipped state and takes with it saved network settings, user accounts, scan or print destinations, recorded content, schedules and any integration with a phone app, and the setup process usually has to be repeated end to end.

Because no vendor is associated with this address, follow the model's own instructions. Typical approaches are a pinhole button held for a set number of seconds while the unit is powered, or a reset entry in the device's local interface. Note that the device may also come back on a different address afterwards.

The address 192.168.1.62 sits in 192.168.0.0/16, a private range of 65,536 addresses masked at 255.255.0.0. This is the consumer block: nearly every home router, mobile hotspot and small office access point ships a default gateway inside it, which is why it is the range most people encounter. Nothing about a private address reveals an organisation or a place, because the identical value is reused independently on millions of networks.

Its /24 is 192.168.1.0/24, spanning 192.168.1.1 through 192.168.1.254 with the broadcast address at 192.168.1.255. Sixty-two is comfortably inside the dynamic range on a typical home or small office router, past the low numbers reserved for gateways and reserved infrastructure. On busy networks it may have been handed to several different devices over time, since a lease only lasts until it expires and is not renewed. This /24 has 254 other documented addresses.

Most visitors arrive with a specific device in mind: a network printer that has stopped responding, a camera or NAS whose web page will not load, or an unrecognised client shown by the router. The practical goal is to reach whatever is listening at http://192.168.1.62.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.1.0/24
Usable192.168.1.1 – 192.168.1.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN