192.168.1.90 router login

To open the admin panel, type 192.168.1.90 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below.

192.168.1.90 router passwords

One default username and password pair has been reported for devices answering on 192.168.1.90.

Username / Password Percentage
blank / blank 100%

No username and password pair is recorded for 192.168.1.90; the only reported outcome is a login that asks for no credentials at all, which is what you would expect from a device whose web interface is open on the LAN or from a client that simply has no interface to sign into. Treat that as a description of what people encountered, not a guarantee. If a prompt does appear, the correct defaults are the ones printed for that particular unit, normally on a sticker on its underside or rear panel, in the supplied manual, or in the documentation your provider issues with managed equipment.

How to log in to your router

  1. Type 192.168.1.90 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.

  2. If the browser reports that it cannot reach 192.168.1.90, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".

  3. If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.

If you do not know the password

Because 192.168.1.90 is far more likely to be a DHCP-assigned client than a gateway, check first whether you are locked out of a device or simply looking at the wrong address; the router's own management page usually lists the hostname and MAC behind each lease. If the device really is unreachable and no vendor is known for this address, follow the recovery procedure in that unit's own documentation. A factory reset, where one exists, is not a free action: it discards Wi-Fi names and keys, port forwarding, static leases, VPN profiles and firewall rules, and every client has to be reconnected afterwards.

192.168.1.90 sits inside 192.168.0.0/16, the private range defined by RFC 1918 that carries a 255.255.0.0 netmask and 65,536 addresses. That block is the one ordinary users meet most often, because home routers, travel hotspots and small office access points overwhelmingly ship their default gateway somewhere within it. Nothing about the address identifies a network, a company or a place: the same numbers exist simultaneously on millions of unrelated LANs, and they are never routed across the public internet.

Within its own segment, 192.168.1.0/24, the usable span runs from 192.168.1.1 to 192.168.1.254 with 192.168.1.255 reserved as the broadcast address. Position 90 falls well inside the stretch that DHCP servers typically hand out, rather than the low numbers administrators reserve for infrastructure, and it is not a position routers commonly use for their own management interface. All 254 usable addresses in this segment are documented separately.

Most people arriving here have seen 192.168.1.90 in a DHCP client list, an ARP table, a printer status page or a network scanner, and want to know which device holds it and whether the address opens a login page.

Block192.168.0.0/16
Netmask255.255.0.0
Subnet192.168.1.0/24
Usable192.168.1.1 – 192.168.1.254

Whois information for 192.168.0.0/16

#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/resources/registry/whois/tou/
#
# If you see inaccuracies in the results, please report at
# https://www.arin.net/resources/registry/whois/inaccuracy_reporting/
#
# Copyright 1997-2024, American Registry for Internet Numbers, Ltd.
#


NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET192 (NET-192-0-0-0-0)
NetType: IANA Special Use
OriginAS:
Organization: Internet Assigned Numbers Authority (IANA)
RegDate: 1994-03-15
Updated: 2013-08-30
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
Ref: https://rdap.arin.net/registry/ip/192.168.0.0



OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Address: 12025 Waterfront Drive
Address: Suite 300
City: Los Angeles
StateProv: CA
PostalCode: 90094
Country: US
RegDate:
Updated: 2012-08-31
Ref: https://rdap.arin.net/registry/entity/IANA


OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: ICANN
OrgAbusePhone: +1-310-301-5820
OrgAbuseEmail: abuse@iana.org
OrgAbuseRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN

OrgTechHandle: IANA-IP-ARIN
OrgTechName: ICANN
OrgTechPhone: +1-310-301-5820
OrgTechEmail: abuse@iana.org
OrgTechRef: https://rdap.arin.net/registry/entity/IANA-IP-ARIN